Kymco

This piston ring set for 50cc GY6 cylinders (39mm bore) can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cyli...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

Replacement mirror in original design with E-certification for Kymco Agility 50, 125 and various motocross vehicles. Cheaper alternative to expensi...

Replacement speedo cable in original dimensions for scooters. Design and dual-side mounts match the original scooter speedo cable. Length from end ...

Naraku Crossover exhaust silencer.

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

Naraku crankshaft in OEM-quality to match Japanese and Taiwanese alternatives. Kitted with high quality, heavy duty quality bearings which allows f...

Original replacement shock for Kymco Agility. Length: 342.5mm from eye to eye.

Naraku Crossover exhaust silencers.

Replacement gaskets for Naraku Crossover exhaust silencers.

Retaining clamp for Naraku Crossover exhaust silencers.

Complete brake calliper, front left for various 50/125cc Kymco scooters with twin piston callipers.

Common problems with stock cylinder heads on the Chinese 4-stroke engines are generally known to be expensive and involve high costs. Chinese repla...

Air filter element for original air boxes. Matches original item 100%

Crankshaft in high quality manufactured in Europe for Chinese 50cc 4-stroke engines and 4-stroke 50cc Kymco. High quality con rod tin much better q...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Malossi reinforced counter pressure torque spring - yellow = super strong

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...