Kymco

Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

Replacement speedo cable in original dimensions for scooters. Design and dual-side mounts match the original speedo cable. Length from end to end: ...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Float bowl gasket for Keihin PWK carburettor.

Recoil spring for kickstarter levers on all Peugeot and Kymco engines.

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Do you need to restrict/reduce the speed of your scooter for legal or insurance reasons then this simple method using a limiter ring is a great opt...

Very good quality aftermarket crank for horizontal 50cc Kymco AC, LC and SF10 engines. The crank is a 100% match to the original and is an outstand...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Replacement motor bearings for scooters with 50-150cc GY6 engines and Kymco scooters with 2- and 4-stroke engines. Dimensions (Internal x External ...

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

Set of 3 replacement sliding shoes for variator plates.

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...