Kymco

Vacuum-operated fuel tap for various Kymco and SYM scooters. Securing nut thread: M16x1.5mm Only for scooters with metal fuel tanks!!! OEM-quality.

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.73). Delivered as shown with piston rings, gudgeon pin and circ...

NARAKU sports variator for Kymco and SYM engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction o...

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

The name says it all: racing spark plugs are for motorsport use and their characteristics make them less suitable for road use. Where these plugs m...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Base gasket for all Kymco and SYM GR1 50cc original cylinders, as well as other scooters with 50cc GR1 engines. See application list.

High-quality, precision cylinder gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

High-quality, precision complete gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

Standard starter motor with 11 teeth for 50cc Piaggio, Gilera, Peugeot (upright) and PGO scooters.

Speed Belt by Polini. This v-belt features an aramid weave that makes it elastic and highly durable. Without doubt, one of the best v-belts in our ...

High-quality, but cost-effective aftermarket piston for original cylinders from Italian piston specialists Meteor. The set contains a piston, gudge...

Malossi reinforced counter pressure torque spring - yellow = super strong

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

Reeds for original factory reed block with carbon membranes. These cause less damaged to the engine should the reed petals break up than metal alte...