Kymco

Pressure-activated petrol tap with M16 thread for GY6 scooters with metal tanks. Delivery also includes the small pre-filter pipe that sits in the ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

This regulator is similar to the NARAKU ignition coil. The controller reaches a significantly higher output than the standard controller by ensurin...

Naraku V.3 carburettor 18.5mm for 50cc 4-stroke scooters. Top quality at an affordable price. No start issues as with Chinese alternatives and good...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Complete steering bearing set with cups, top and bottom. Steering bearings should always be replaced when changing the steering stem or if there is...

Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engi...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Inlet adapter spacer for horizontal Kymco engines (type SF10). This adapter allows intake manifolds to be used on Minarelli engines. Our race team ...

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Complete front left indicator, orange. With E-certificate. Suitable for all Chinese-built 4-stroke vehicles in the same design as the REX RS450, Ba...

Exhaust manifold gasket with accurate fit to the factory installed exhaust system.

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Air filter for Kymco 50cc 4-stroke scooters. The filter is the same in size as the original. Making it ideal to use as a spare. Just replace and do...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

Performance kit for Kymco 50cc 4-stroke models with derestricted CDI, variator sleeve and optimized main jet. Ready to ride, for higher top speed a...

Repair kit for 24mm Naraku carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster ...

Complete front left indicator, orange. With E-certificate. Suitable for all Chinese-built 4-stroke vehicles in the same design as the REX RS450, Ba...

Replacement air filter for Kymco People GT125 i and People GT300 i scooters. 100% match of the original. Air filters should be checked regularly an...

Everyday 10 inch tubeless tyre for almost any road conditions and great value for money! This is a true allrounder, offering good grip from its dee...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Replacement indicator glass for various CPI, Keeway, Kymco and Rieju scooters, geared mopeds and ATVs. The turn signal lens corresponds to the orig...

Complete lock set as original replacement for Kymco Agility 50cc. Please check image against the connector.

Complete aftermarket carburettor for 4-stroke scooters, with choke. The carburettor is factory-fitted on all 50cc 4-stroke Kymco scooters and many ...

Low-cost aftermarket exhaust, non-performance enhancing. Good fit. For those looking for a simple replacement to a damaged or defective exhaust. Lo...

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

OEM-quality air filter for original air boxes.

Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is ...

This Variator sleeve replaces the original factory fitted sleeve and collar. This lifts the restricted power. The scooter will be capable of approx...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

Ignition lock to replace more expensive original items. Combi lock with all the original functions and interchangeable. Supplied as shown. Manufact...