Kymco

Common problems with stock cylinder heads on the Chinese 4-stroke engines are generally known to be expensive and involve high costs. Chinese repla...

Air filter element for original air boxes. Matches original item 100%

Air filter for original air box. In contrast to the original filter, this air filter is soaked in oil, which results in optimised filtering of air ...

Air filter element for original air boxes. Matches original item 100%

Very well-engineered and robust sports clutch from Malossi. Reinforced clutch springs and weight saving on the plates means better drive from light...

Malossi strengthened counterpressure springs for X-Citing 500 Kymco engines. Counterpressure springs place the drive belt under tension, preventing...

Jumpy drive and bad power transfer are usually signs that the clutch plates are either worn or glazed. The only solution is to change the plates. W...

Crankshaft in high quality manufactured in Europe for Chinese 50cc 4-stroke engines and 4-stroke 50cc Kymco. High quality con rod tin much better q...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

PRO-X is the most cost-effective shock in the YSS range. Double-action damping system with adjustable spring preload (tool included). Progressive d...

PRO-X is the most cost-effective shock in the YSS range. Double-action damping system with adjustable spring preload (tool included). Progressive d...

Speed Belt by Polini. This v-belt features an aramid weave that makes it elastic and highly durable. Without doubt, one of the best v-belts in our ...

High-quality, but cost-effective aftermarket piston for original cylinders from Italian piston specialists Meteor. The set contains a piston, gudge...

Malossi reinforced counter pressure torque spring - yellow = super strong

Airsal 150cc [Sport] cylinder gasket set Racing - GY6 152/157 QMI

Piston ring set suitable for the Airsal 150cc sport cylinder kit for GY6 152/157 QMI/QMJ.

Airsal piston kit 150cc [Sport] - GY6 152/157 QMI

Airsal high-performance cylinder kit 150cc capacity, with gasket set, piston, rings etc. Hard chromed liner. 150cc gives 125cc engines notably bett...

Ersatzölfilter für Kymco Maxi Roller. Der Ölfilter muss spätestens bei jedem Ölwechsel erneuert werden. Er filtert verbrannte Anteile des Öls...

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Malossi Multivar 2000 “maxi-torque” converter for larger capacity machines. Sinter metal, self-lubricating anti-friction bush with coated-steel...

The new Tecnigas product for the start of the 2009 season: The TREK exhaust. A further development on the well-known Tecnigas TEK exhaust. The “R...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Electric starter motor, suitable for all horizontal Kymco and SYM 50cc 2-stroke engines. OEM reference numbers: MS5017, 31210-GKAK-90C, VC27961, 15...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Variator locking tool for 4-stroke Kymco engines. With this tool, the pulley is locked against rotation. This allows you to loosen or tighten all c...

Reeds for original factory reed block with carbon membranes. These cause less damaged to the engine should the reed petals break up than metal alte...

Cylinder base gasket for horizontal Kymco SF10 engines for use on air- or water-cooled engines.

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Low-cost standard brake disc in original quality. This brake disc has 3 mounting points and a diameter of 180mm. For front and rear disc brakes wit...

Front outer v-belt pulley. Suitable for GY6 139QMB/QMA engines, Kymco 4-stroke engines and Kymco models with horizontal cylinders. Outside diameter...

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Complete gasket set for Honda Dio, Sym, Kymco and Daelim engines with 10” wheels. Set contains all relevant gaskets for crankcase, cylinder etc. ...

Maxi Fly Clutch from Malossi with Maxi Delta Clutch, developed for standard vehicles. Improved design, and materials.Clean and strong power transfe...

Complete replacement engine for Chinese-built 4-stroke scooters with 12” wheels. As a result of the time saved, at times replacing the entire eng...

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

Well priced replacement shock in OEM-quality with chrome spring. 295mm centre of eye to centre of mounting fork. Great handling and progressiveness...

Well priced replacement shock in OEM-quality with chrome spring. 275mm centre of eye to centre of mounting fork. Great handling and progressiveness...

Malossi BigBore cylinder with 52mm bore in aluminium with hard chromed liner. The bore = 87.9cc capacity. Original head may be retained according t...

Of Tecnigas we have a very nice chrome exhaust processed in sport optics in the delivery program. A visual treat with 2-stroke look. Performance-wi...

CNC-machined replacement piston for 52.4mm Naraku cylinder with molybdenum coating. Comes complete with piston rings, oil scraper rings, gudgeon pi...