Kymco

Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engine...

Replacement cylinder gasket set for 300cc Naraku cylinders. Comprises cylinder base gasket and cylinder head gasket.

Piston set Airsal 50cc [Sports] - Kymco horiz LC.

Piston ring set Airsal 50cc [Sport] - Kymco horizontal LC

High performance aluminum cylinder kit from Airsal with 49.5cc displacement and hard-coated cylinder liner. Compared with cylinders made ​​of c...

Airsal 50cc piston set [Sports] - AC Kymco horiz

set piston rings Airsal 50cc [Sport] - Kymco horizontal AC

High performance aluminum cylinder kit from Airsal with 49.5cc displacement and hard-coated cylinder liner. Compared with cylinders made ​​of c...

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi Torque spring. Blue - +106%

Malossi Torque spring. Green - +60%

Malossi strengthened counterpressure spring for rear Malossi convertors. Counter pressure springs place the drive belt under tension, preventing sl...

20mm Intake manifold spacer with o-ring. A broken spacer or o-ring could certainly be a cause for running issues, the only solution is to replace.

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Scooter repair manual. Zipperer has compiled this comprehensive repair manual for the Kymco 2-stroke 50cc scooters. For pro’s or beginners. All t...

This kickstarter will get you firing again. Matches the design and size of the original item and is suitable for anyone looking for a simple kickst...

The NARAKU Basic 75cc cast iron cylinder kit is an affordable and robust alternative that won’t break the bank and will give you more power from ...

Naraku sports High Lift camshaft for Kymco 250/300 and PGO 250 engines. Can be used with the 300cc Naraku or Athena cylinder set.

Malossi finely manufactured front belt pulley (half pulley) in high alloyed aluminium. More effective warming up phase and runs quieter. Pulley can...

Need more power? No problem! Big Bore ceramic cylinder kit for 250cc Kymco and identical PGO engines. With the Naraku cylinder kit we are offering ...

Corresponds to the original air filter in size and filtration performance. Fits only the original air box.

Alternative 36 tooth rear sprocket.

Standard rear 38 tooth sprocket.

Standard 17 tooth front sprocket.

Alternative 16 tooth front sprocket.

Crank chain sprocket 15T

Aluminium foot boards - eye catcher that enhances every scooter’s look! Made from high-quality 4mm aluminium channelled sheet, which fits perfect...

Crank chain sprocket 14T.

30 tooth rear sprocket.

Racing transmission with ratio of +15%. A must for tuned engines. Power alone is not enough, you need to get it to the ground. Not recommended for ...

Aftermarket 70cc Malossi cast cylinder from Italian specialists Meteor. This very high-quality item is a cost-effective alternative to the original...

Sports variator from Malossi for better acceleration and top speed. Variator weights and altered counterpressure spring included. Malossi Multivar ...

Very robust and slightly more powerful 50cc grey cast iron cylinder kit for air-cooled engines. A good alternative to defective original cylinders ...

Initially an inexpensive alternative this is now one of the most popular exhaust systems in our range in the original look. The great value for mon...

Very robust and lightly tuned 50cc cast iron cylinder kit for air-cooled engines. Good alternative to the original cylinder or as light tuning enha...

The V.2 cast iron cylinder kit from Naraku for all air-cooled horizontal Kymco engines (SF10) is a high-performance 70cc kit that won’t sit down ...

K&N Tuning air filters are the best-known and most installed racing air filters in 4-stroke engine tuning. The increased airflow, together with...

Licenced replica of the English Amal carburettor from Arreche, as cheap original replacement or tuning item. 21mm for high-end and racing engines. ...

Licenced replica of the English Amal carburettor from Arreche as replacement or tuning item. Fits the original intake manifold. Compact design allo...

Licenced replica of the English Amal carburettor from Arreche as replacement or tuning item. Fits the original intake manifold. Compact design allo...

The Tecnigas Next-R is a well-proven and all-round exhaust for 50cc or 70cc sport cylinders. This exhaust has a good performance yield at relativel...

The Tecnigas Next-R is a well-proven and all-round exhaust for 50cc or 70cc sport cylinders. This exhaust has a good performance yield at relativel...

Engine gasket set for Kymco KB 50, Fever KCA / ZX. Supplied as shown without shaft seals. Delivery includes: Crankcase cover gasket Transmission co...

Engine gasket set for Kymco DJ 50. Supplied as shown without shaft seals. Delivery includes: crankcase cover gasket Transmission cover gasket 2x in...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Malossi Multivar 2000 “maxi-torque” converter for larger capacity machines. Sinter metal, self-lubricating anti-friction bush with coated-steel...