LS49 50 2T

Yasuni replacement silencers in Carbon design suitable for Yasuni Z exhaust systems. The silencers comes with gasket and nuts. it also works on sys...

Yasuni replacement silencers in carbon / aramid construction suitable for Yasuni Z exhaust systems. The silencers comes with gasket and nuts. it al...

gasket for the silencers at all Yasuni Scooter exhaust systems and geared moped exhaust systems. Suitable respect, not for Yasuni Carrera 30th

Yasuni replacement silencers fits in black anodized aluminium construction for Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21...

Yasuni replacement silencers in Carbon design fits Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21 Exhaust. The silencer comes...

Yasuni replacement silencers fits in silver aluminium construction for Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21 Exhaust...

Yasuni replacement silencers in carbon / aramid construction fits. For Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21 Exhaust...

Carbone Lorraine V-Brakes sintered pads for scooters, motorcycles, mopeds and quads. Outstanding braking performance even in the wet, less slip and...

Long-established and experienced DURO manufacturer produces reliable and durable tyres at reasonable price. The DURO DM1092 is a 10 inch scooter ty...

Tubeless tyres. With tubeless rims a tubeless tyre MUST be mounted, in order to guarantee a proper seal. It can however be used in combination with...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

Great quality Naraku crank for Euro 2 Minarelli replica Chinese-built engines. Corresponds to the original crankshaft dimensions. 16mm crank shaft ...

The Heidenau K58 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Thanks to the high-quality materials used in thi...

Pressure-activated petrol tap for scooters with Chinese-made, Minarelli-based engines (1E40QMB) such as CPI, Keeway etc. A petrol tap failure can o...

Shaft oil seal Internal diameter: 20mm External diameter: 30/33.5mm Thickness/Depth: 6mm

Woodruff key with blunted edges for scooters with 50-180cc Piaggio 2-stroke engines. length=12mm, wide=3mm, high=5mm

Very high-quality 3 in 1 tool for blocking and removing the variator and clutch bell, including integrated hex wrench to loosen the clutch retainer...

Arreche 23.5mm sealing ring for carbs with threaded flange.

Reinforced starter motor freewheel without starter sprocket, from Naraku. For original and tuned scooters with Minarelli-based, Chinese-built engin...

Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinder. Great as a replacement for broken or damaged studs. One individual stud...

Arreche 25mm sealing ring for carbs with threaded flange.

24mm intake manifold for maximum flow and performance. Ideally, you match the manifold to the size of the carb.

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Special belt size...

Cylinder base gasket for horizontal Minarelli and 1E40QMB engines. For air and water-cooled engines.

Replacement front right indicators for various CPI, Keeway, MBK, PGO, Rieju and Yamaha scooters. Suitable for front right and / or rear left. The t...

Replacement front left indicators for various CPI, Keeway, MBK, PGO, Rieju and Yamaha scooters. The turn signal corresponds to the original part. R...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Simple, adaptable and genius intake manifold. The 2 adapter plates, 24mm and 32mm allow for different sizes of carb. The rubbers can be rotated in ...

Top Performances racing reed block with 2 reeds. As you would expect from racing technology, the petals are made from carbon. Steel petals can caus...

Alternator for Minarelli-based Chinese copies, as found in many CPI, Keeway, Generic, Longjia and many other Chinese scooters. Before ordering, che...

Licenced replica of the English Amal carburettor from Arreche, as cheap original replacement or tuning item. Fits the original intake manifold. Com...

Licenced replica of the English Amal carburettor from Arreche. Available in various sizes. 16mm easy to tune for standard cylinders and tuned 50cc ...

Licenced replica of the English Amal carburettor from Arreche. Available in various sizes. 16mm easy to tune for standard cylinders and tuned 50cc ...

Belt pulley tappet. The accompanying kickstarter part should be replaced when the cog is changed. Suitable for CPI and Keeway models with 16mm cran...

When using a downhill handle bar, the handlebar cowling has to be removed. This leaves an unsightly hole in the upper front panel. This Optics Part...

Number plate which is positioned centrally behind the rear wheel. This was seen on standard piaggio scooters. Made of brushed stainless steel, the ...

Adjustable aftermarket clutch, same build as the Hebo. The adjustable 3-plate clutch is ideal for lightly or heavily tuned scooters. The major adva...

The starter clutch without starter sprocket. We only recommend this item without a starter sprocket if the sprocket is in 100% working order and fr...

Cylinder head nut with M7 thread for all Minarelli and Minarelli-based engines, as well as other models with M7 threads on the cylinder stud bolts.

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Locking spring for kick-starter carrier sprockets.

Kickstart gear for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.

Replacement reed valve gasket for horizontal 50cc 2-stroke Minarelli engines and Aprilia/Suzuki engines. Please check that a gasket is required on ...

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/52 teeth.

Gearbox input shaft. This is where the clutch is mounted. 13 teeth as per original item.