Malaguti

Replacement, good quality starter motor for 50cc scooters from Aprilia (with Aprilia engines), Suzuki, TGB, Italjet, as well as Morini. Starter mot...

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines. White

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Locking spring for kick-starter carrier sprockets.

Alternator rotor puller. Required for working on the alternator or parts under it and on crank bearings. Pressure bolt screws into the rotor and te...

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli engines and other models using the same size nut. Thread on the rotor side of ...

Kickstart gear for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.

Replacement reed valve gasket for horizontal 50cc 2-stroke Minarelli engines and Aprilia/Suzuki engines. Please check that a gasket is required on ...

Aftermarket oil pump in original design and flow. A defective oil filter can cause seizing, or damage the crank and bearings. Such a small part mak...

Great price cylinder kit for air-cooled Morini engines. The cylinder kit is identical in size and performance to the original, making it an obvious...

Standard cylinder kit for horizontal water-cooled Minarelli engines. Great price! The cylinder kit is identical in size and performance to the orig...

Great price cylinder kit for horizontal air-cooled Minarelli engines. The cylinder kit is identical in size and performance to the original, making...

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli AM, Generic, KSR-Moto, Keeway, Motobi, Ride, CPI, 1E40MA, 1E40MB engines and o...

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/52 teeth.

Gearbox input shaft. This is where the clutch is mounted. 13 teeth as per original item.

Replacement cylinder kit for Minarelli-based, air-cooled Chinese-built engines (Euro2 till 2003) e.g.: CPI, Keeway etc. Great price! The cylinder k...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Complete alternator for Minarelli-based 2-stroke engines. Suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 different ver...

Bolt and nut set for Chinese-built 2-stroke scooters, Keeway etc. with almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering ind...

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Morini AC engines. Delivery as shown, including: piston rings, gudg...

Replacement indicator glass for rear original indicators. Suitable for original indicators. Replaces OEM-No.: R52190061A0 / 2190061A / 800066343 / ...

Complete replacement for various Benelli, Italjet and Malaguti scooters. Replaces OEM-No.: R52140041A0 / 2346589A / 800066342 / 53040031A / 33400-G...