Mirage 125

Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.

Valve cover for cylinder heads without SLS. For all GY6 125/150cc 152/157QMI engines.

GY6 Racing CDI with no rev limiter. This CDI features a performance optimised ignition curve: ideal for later tuning mods, such as a big bore kit. ...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

Airsal 165cc [Sport] cylinder gasket set - GY6 152/157 QMI

Airsal 150cc [Sport] cylinder gasket set Racing - GY6 152/157 QMI

Repair kit for 24mm Naraku carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster ...

Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Att...

Naraku cylinder gasket set (58.5mm/160cc) 4-stroke

Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.

Folding kickstarter lever for 125/150cc GY6 4-stroke Chinese-built engines.

This cylinder gasket set comprises all the necessary gaskets from the base gaskets up. Can be used on Naraku 4-stoke cylinders (NK600.10), but is a...

Naraku cylinder gasket set (61mm/170cc) 4-stroke

Naraku cylinder gasket set (63mm/180cc) 4-stroke

Side stand for 125/150cc Chinese-built 4-stroke scooters. Fits most vehicles. As there are various bodywork designs, in some cases manufacturers wi...

Complete oil pump for 125/150cc GY6 engines. Delivery as shown.

Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. S...

Complete timing chain tensioner suitable for 125/150cc GY6 Chinese-built 4-stroke engines. Delivery includes tensioner tool, which is only to be us...

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original.

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Timing chain for GY6 4-stroke engines 152/157 QMI with 125 or 150cc. Chain has 45 links.

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Complete speedo cable for GY6 125/150cc Chinese-built 4-stroke scooters. Length: 96cm. For added assurance, please check the original against the p...

Throttle cable for 125/150cc 4-stroke Chinese-built scooters. The throttle cable has a length of 212cm and fits almost every 125cc and 150cc model....

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Original brake lever for front brake discs Suitable for all front disc brake designs. For added assurance, please check the image and compare with ...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.

Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.

Rubber stops for the engine rockers. 2 items generally required when changing out.

Complete intake hose for the crankcase cover, with clamp. Suitable for crankcase covers on 125/150cc GY6 4-stroke engines.

Original fan cover for 125/150cc GY6 4-stroke Chinese-built engines.

Indicator relays for 125/150cc GY6 4-stroke Chinese-built scooters. 3-pin plug.

Crank seals for 125/150cc GY6 4-stroke engines. Set contains 4 seals for left and right-hand side, as well as for the gearbox output shaft.

Low-cost replacement plug for Chinese-built 4-stroke 50cc engines and all Kymco 50cc 4-stroke engines. Code: CR7HNS, matches NGK CR7HSA or C7HSA. F...

Snap ring for Turbo Kit silencer with removable db killer.

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.