Motofino

Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of th...

Complete set of quality crank oil seals from Naraku, for scooters with Chinese-built, Minarelli-based 2-stroke engine (engine code 1E40QMB). Set co...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

High-quality replacement piston for the 70cc original and 70cc NARAKU cylinder kits for Minarelli 1E40QMB engines with 12mm gudgeon pin. Delivered ...

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Naraku Sports Contra Spring V.2 +2000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku sports clutch. Solid sports clutch that engages 1500-2000rpm higher than standard, meaning better drive and traffic light starts. Fiber rein...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Structurally, the original V-belt pulley with a star-shaped carrier is an inferior component. The star shim is just too thin for the forces acting ...

Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Att...

This replacement pulley for standard motors corresponds in shape and dimensions to the original and provides an inexpensive alternative when pulley...

Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the orig...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

NARAKU sports variator for 2-stroke CPI, Keeway, Generic models, as well as all Chinese Minarelli-based replica engines. When calibrated, this vari...

Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.

Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly sui...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Tuning CDI unit with no rev limiter from Naraku. Derestricts your scooter and makes it revvier. Check the connectors in the product image for accur...

Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hamm...

Naraku CNC-machined racing clutch bell. This new generation Naraku clutch bell competes with the MHR Malossi and Polini Evo bells. Distortion is al...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Naraku CNC-machined racing clutch bell for Kymco, Honda and Chinese-built maxi scooters. Ensures vibration-free running and the cooling grooves hel...

Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more d...

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Piston kit for the Naraku 4-stroke cylinder (NK600.52), 150cc GY6 original cylinders and 150cc cylinder kits from other manufacturers. Set contains...