Motofino

Piston ring set Airsal 50cc [T6-Racing] - CPI, Keeway E2

Airsal piston kit 50cc [T6-Racing] - CPI, Keeway E2

Airsal cylinder head 50cc [T6-Racing] - CPI, Keeway E2

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

SLS hose clamp - 139QMB/QMA

Oil plug gasket for 139QMB/QMA.

SLS [secondary air system] gasket - 139QMB/A

Oil strainer bolt O-ring - 139QMB/QMA

Timing chain tensioner gasket for 139QMB/QMA.

Cylinder head gasket [50cc = 39mm] - GY6 50cc

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

Valve cover for GY6 125/150cc 4-stroke 152/157QMI engines WITH SLS system. The valve cover is ready to install and delivered as shown. Valve cover ...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

Little end bearing for 12mm gudgeon pin. This size is generally found on CPI, Keeway, Mawi, Longija, Generic engines etc. from 2003 on, as well as ...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Replacement drive belt suitable for GY6 125/150cc engines with long blocks. Dimensions: 835-20-30

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Rubber stops for the engine rockers. 2 items generally required when changing out.

Rubber centre stand stop for 125/150cc Chinese-built scooters. Suitable for most scooter types, but please check image against the original item.

Complete intake hose for the crankcase cover, with clamp. Suitable for crankcase covers on 125/150cc GY6 4-stroke engines.

Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine...

Outer v-belt pulley for GY6 125/150cc 4-stroke Chinese-built engines.

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Original fan cover for 125/150cc GY6 4-stroke Chinese-built engines.

Alternator stator for GY6 125/150cc machines. There are many variations of this alternator of these engines. They can however be quite easy to iden...

Complete air filter element [type 1] for 125/150cc Chinese GY6 4-stroke scooters. As there are so many variations to this scooter, please check the...

Complete shock unit for 125/150cc Chinese-built 4-stroke scooters, chromed. Non-adjustable. Length: 335mm, please ensure you are ordering the corre...

Complete aftermarket piston for GY6 150 4-stroke Chinese-built models. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pi...

Timing chain for GY6 4-stroke engines 152/157 QMI with 125 or 150cc. Chain has 45 links.

Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releas...

Complete steering bearing set for 125/150cc 4-stroke Chinese-built scooters The manufacturer used a tapered roller bearing as the lower bearing and...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

The Naraku HS-Racing is a well-engineered High Speed variator for Minarelli-based 2-stroke engines with a 16mm tail shaft. The variator comes with ...

Complete oil pump for 125/150cc GY6 engines. Delivery as shown.

Standard camshaft for 125cc and 150cc GY6 engines as originally factory-fitted.

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/42 teeth.