Motofino

This Variator sleeve replaces the original factory fitted sleeve and collar. This lifts the restricted power. The scooter will be capable of approx...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Universal throttle sleeve with rubber grip for 125/150cc 4-stroke scooters with GY6 chassis and 22mm diameter handlebars. outer length: 122mm inner...

High-torque 70cc NARAKU cylinder kit with 12mm gudgeon pin. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the...

Taillight cover / faring in silver. This faring fits directly underneath the rear light unit.

Under seat front cover fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Outer part front leg shield in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Speedo display surround fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attentio...

High-quality, precision complete gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks ...

Valve cover gasket [rubber] - GY6 50ccm

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all rear disc brake lever fittings. For added assurance, please che...

Complete alternator for Minarelli-based 2-stroke engines. Suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 different ver...

The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing ...

Throttle cable to fit most 4-stroke Chinese-built scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...

Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines, CPI, Keeway, Generic, Mawi, Longija, Morini engines, April...

Fan cover for CPI, Generic, Keeway, Mawi, Longija right-hand side fans and air-cooled Minarelli engines.

Rubber float bowl gasket for all original and Naraku NK200.01 carbs for GY6 50cc engines 1239 QMB/QMA.

Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Spark plug connector for all GY6 engines, 50-180cc.

Complete two-person seat unit, black, silver. Suitable for all vehicles with bodywork design similar to the Rex RS450, Baotian BT50QT-9, Benzhou Ci...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Speedo cable with retainer nut on upper and lower end for 2005 models on. Please check the original item against the product image. We offer 3 spee...

Alternator with cable connector/plug and Pick-up sensor. These alternators are currently available in 2 different versions. The difference is the i...

Exhaust manifold gasket for all Chinese-built 4-stroke and Kymco 50cc 4-stroke vehicles. Also suitable for all Naraku 4-stroke tuning cylinder kits...

Replacement rubber cap for oil tanks on the 2-stroke Chinese scooters.

GY6 150cc complete cylinder head with valves suitable for 157QMJ engine types. This cylinder head does not include secondary air system connection....

Low-cost Racing membrane block in OEM-quality, with 6 reeds. Suitable for all scooters with Piaggio engines from 1999 on. Suitable for all horizont...

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...