Naraku

Naraku 30mm racing carb for 125-300cc engines. Racing only! 36mm connection, 50mm on the filter side. Throttle cable layout on the side. Build heig...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Naraku piston ring set for air-cooled 125cc Yamaha and MBK 5ML engines.

Naraku replacement gudgeon pin for air-cooled 125cc Yamaha and MBK 5ML engines.

Replacement studs with M8 thread at both ends, including M8 nuts for use on exhaust manifolds. Set of 10. Nut length incl. collar: 20mm, length of ...

Replacement M6 threaded studs for mounting exhaust systems to the cylinder etc. Set contains 10 studs.

M10 threaded cylinder head nut, set of 4. 12mm long with collar. Suitable for all scooters, motorcycles and quads with M10x1.25 cylinder studs. The...

M8 threaded cylinder head nut, set of 4. 20mm long with collar. Suitable for all motorcycles, scooters and quads with M8 cylinder studs. The nuts c...

Naraku Performance tuning 4-stroke carburettor needle suitable for PWK carbs. Makes PWK carb tuning much easier. The result is easy tuning and redu...

M7 threaded cylinder head nut, set of 4. 13mm long with collar. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines with M7 cylinde...

M6 threaded cylinder head nut, set of 4. 13mm long with collar.

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Morini AC engines. Delivery as shown, including: piston rings, gudg...

Complete Naraku piston kit for the 60cc Naraku cylinder kit on Kymco and SYM cylinders, where the intake is on the cylinder. Comes with piston, pis...

Complete cylinder gasket set for Naraku or original cylinders on SYM, Peugeot 4-stroke engines. Set contains all the necessary gaskets from the cyl...

Naraku cylinder gasket set for 125cc AC Yamaha and MBK engines with carburettors. Fitted to Cygnus and MBK Flame models (among others) up to 2003. ...

For those who do not want to go radical with performance tuning such as 47mm or 51mm, but fancy a little more grunt, there is a 63cc cylinder kit w...

NARAKU Performance is offering this cylinder kit for all water-cooled 125cc Kymco 4-stroke engines at a fair price. Many Kymco riders know the Yage...

Complete cylinder kit with all gaskets and small parts for fitting. This 125cc Naraku cylinder yields engine performance corresponding to the origi...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

These cylinder gasket sets contain all the necessary gaskets from the base gasket upwards and can be optionally used on the Naraku 2-stroke cylinde...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

Complete piston kit for 125cc Yamaha and MBK AC 2-valve 4CW engines. Set is suitable for original and Naraku cylinder sets. Delivery includes pisto...

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.73). Delivered as shown with piston rings, gudgeon pin and circ...

Piston ring set for 65cc Naraku cylinder kit for SYM Mio and Fiddle II.

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on 70cc Naraku 2-stroke cy...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

Top quality cylinder kit by Naraku. An extra emphasis was put on the piston quality. The Naraku piston has a molybdenum coating, so that cylinder a...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Replacement cylinder head for 50cc Peugeot LC cylinders. This cylinder head is manufactured to, and meets, OEM standards and quality of the vehicle...

Replacement cylinder head for 50cc Minarelli AM cylinders. This cylinder head is manufactured to, and meets, OEM standards and quality of the vehic...

replacement cylinder head for 50cc Minarelli LC cylinders.

Replacement cylinder head for 50cc Piaggio LC cylinders from ’98 on. Head can be used on older models with a pentagonal barrel. This cylinder hea...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 743-18-20

The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those looking for a replacement for a damaged cylinder or piston...

NARAKU sports variator for Peugeot engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of the ...

NARAKU sports variator for GY6 and 50cc Kymco 4-stroke engines as well as tuned Kymco/ SYM s-stroke engines. When calibrated, this variator provide...

NARAKU sports variator for Kymco and SYM engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction o...

NARAKU sports variator for Kymco and SYM engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction o...

NARAKU sports variator for Piaggio engines up to 1998. When calibrated, this variator provides good acceleration at higher top speeds. The restrict...

NARAKU sports variator for Piaggio engines from1998 on. When calibrated, this variator provides good acceleration at higher top speeds. The restric...

Piston ring set for 70cc Naraku cylinder kit for 1E40QMB engines with 12mm gudgeon pin.

Great quality Naraku crankshaft for air-cooled Yamaha and MBK 125cc engines. Features HD big end bearings. For use on Yamaha 5ML (4-valve from and ...

Complete piston kit for 125cc Yamaha and MBK AC 4-valve 5ML engines. Set is suitable for original and Naraku cylinder sets. Delivery includes pisto...

Naraku cylinder gasket set for 125cc AC Yamaha and MBK engines from 2004 with carburettor, and 2009 on injection models. Fitted to Cygnus and MBK F...