Nova Motors

This bush sits in the crankcase cover and carries the kickstarter shaft. It can quickly become worn and cause kickstarter issues and, in extreme ca...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Fan cover for 50cc GY6 139QMB/QMA engines. Includes a cover cap with hole for checking the ignition timing.

This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals pr...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Set of 3 replacement sliding shoes for variator plates.

Alternator with cable connector/plug and Pick-up sensor. There are currently 2 different versions of this alternator. The difference is the insulat...

Complete steering bearing kit for some low-cost and Chinese-built scooters, incl. shells, ball races and locking nuts.

It is very easy to lose petrol caps! At the petrol station, broken keys or just dropped never to be found again. Instead of buying a new set of key...

Front alloy wheel for disc brake models. Suitable for all scooter models with 2.15x10 wheels. The model pictured is a factory-fitted item on Chines...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Suitable for all standard production handlebars 22mm.

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...

Grip set including throttle sleeve, left and right. These can of course be ordered individually, just select your item from the list below. outer l...

Complete speedo unit. Suitable for vehicles with a body design similar to the Rex RS450, Baotian BT50QT-9, Benzhou City Star etc. For added assuran...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Low-cost replacement plug for Chinese-built 4-stroke 50cc engines and all Kymco 50cc 4-stroke engines. Code: CR7HNS, matches NGK CR7HSA or C7HSA. F...

Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engin...

Intake manifold for 24mm Naraku tuning carbs. Delivery includes spacer, clamp and gasket. This intake allows a free airflow through a 24mm carb, al...