Nova Motors

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

O-ring for isolators and intake manifolds. The isolator sits between the carb and the intake manifold and often causes poor engine running as a res...

This bush sits in the crankcase cover and carries the kickstarter shaft. It can quickly become worn and cause kickstarter issues and, in extreme ca...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Fan cover for 50cc GY6 139QMB/QMA engines. Includes a cover cap with hole for checking the ignition timing.

This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals pr...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Set of 3 replacement sliding shoes for variator plates.

Alternator with cable connector/plug and Pick-up sensor. There are currently 2 different versions of this alternator. The difference is the insulat...

Complete steering bearing kit for some low-cost and Chinese-built scooters, incl. shells, ball races and locking nuts.

It is very easy to lose petrol caps! At the petrol station, broken keys or just dropped never to be found again. Instead of buying a new set of key...

Front alloy wheel for disc brake models. Suitable for all scooter models with 2.15x10 wheels. The model pictured is a factory-fitted item on Chines...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Suitable for all standard production handlebars 22mm.

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...

Grip set including throttle sleeve, left and right. These can of course be ordered individually, just select your item from the list below. outer l...

Complete speedo unit. Suitable for vehicles with a body design similar to the Rex RS450, Baotian BT50QT-9, Benzhou City Star etc. For added assuran...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Low-cost replacement plug for Chinese-built 4-stroke 50cc engines and all Kymco 50cc 4-stroke engines. Code: CR7HNS, matches NGK CR7HSA or C7HSA. F...

Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engin...

Intake manifold for 24mm Naraku tuning carbs. Delivery includes spacer, clamp and gasket. This intake allows a free airflow through a 24mm carb, al...

Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.

Tecnigas Silent Pro exhaust system for 4 stroke engines. Fits all 50cc GY6 4-stroke scooters with 12 or 13 inch wheels. The manufacturer provides t...

Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engin...

Channelled sheet foot board in aluminium. Fitted in the same way as the “speed” with the supplied bolts. Suitable for all Chinese-built 4-strok...

Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly sui...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Starter motor, suitable for all Chinese-built 4-stroke engines. This item can be used without a problem, even where the originally fitted item has ...

Polini Hi-Speed now available in a 4-stroke version set! Hi-Speed stands for better drive and smoother shifting. Supplied as shown with one set of ...

Malossi Multivar variator for great drive and shifting, as well as increased top end. [computer-optimized running surface] Now available for Chines...

Complete engine gasket set for all Chinese-built 4-stroke GY6 139QMB/QMA scooters with 10” wheels; v-belt length 669mm, crank-gearbox input shaft...