Nova Motors

Piston ring set Airsal 70cc [T6 Tech-Piston] - Minarelli horizontal AC

Airsal 70cc racing cylinder kit, complete with gasket set, piston, piston rings etc. The T6 Tech-Piston matches the T6-Racing exactly and also feat...

Piston ring suitable for Airsal 70cc T6-Racing cylinders for Minarelli horizontal AC engines.

Airsal piston kit 70cc [T6-Racing] - Minarelli horizontal AC

Airsal 70cc cylinder gasket set Tech-Piston - horizontal Minarelli AC

Airsal cylinder head [70cc] - Horizontal Minarelli AC

Airsal piston kit 50cc [T6-Racing] - Minarelli horizontal AC

Piston ring set Airsal 50cc [T6-Racing] - Minarelli horizontal AC

Piston ring suitable for Airsal 50cc T6 Tech-Piston cylinders for Minarelli horizontal AC engines.

Airsal piston kit 50cc [Tech-Piston] - Minarelli horizontal AC

Airsal 50cc racing cylinder kit, complete with gasket set, piston, piston rings etc. (cylinder head not included) The T6 Tech-Piston matches the T6...

Airsal 50cc cylinder gasket set - Horizontal Minarelli AM6

Piston ring set Airsal 50cc [Sport] - Minarelli horizontal AC

Airsal piston kit 50cc [Sport] - Minarelli horizontal AC

Airsal cylinder head [50cc] - horizontal Minarelli AC

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Malossi MHR Team exhaust system, specially tuned for the Team cylinder. Clean torque and great power deliver. Very good low down torque that you do...

Road legal update for the MHR Malossi cylinder. MHR Replica is a 70cc aluminium cylinder with hard chromed cylinder liner. One of the strongest per...

The new Tecnigas product for the start of the 2009 season: The TREK exhaust. A further development on the well-known Tecnigas TEK exhaust. The “R...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

SLS hose clamp - 139QMB/QMA

Oil plug gasket for 139QMB/QMA.

SLS [secondary air system] gasket - 139QMB/A

Oil strainer bolt O-ring - 139QMB/QMA

Timing chain tensioner gasket for 139QMB/QMA.

Cylinder head gasket [50cc = 39mm] - GY6 50cc

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

Naraku Racing variator for all 50cc 2-stroke Minarelli engines with upright and horizontal cylinders. The surfaces offer optimal ratio change. This...

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Complete replacement engine for 125cc GY6 4-stroke 152QMI engines with a long block and rear disc brake. Long block models take an 743mm v-belt. Th...

Complete replacement engine for 125cc GY6 4-stroke 152QMI engines with a long block and rear disc brake. Long block models take an 835mm v-belt. Th...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

M10x1.25mm nut for front belt pulleys. For Minarelli engines or other models with the same dimensions. (Thread on the variator side of the crank).

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

Little end bearing for 12mm gudgeon pin. This size is generally found on CPI, Keeway, Mawi, Longija, Generic engines etc. from 2003 on, as well as ...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Replacement drive belt suitable for GY6 125/150cc engines with long blocks. Dimensions: 835-20-30

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Rubber stops for the engine rockers. 2 items generally required when changing out.

Rubber centre stand stop for 125/150cc Chinese-built scooters. Suitable for most scooter types, but please check image against the original item.

Complete intake hose for the crankcase cover, with clamp. Suitable for crankcase covers on 125/150cc GY6 4-stroke engines.

Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine...