Nova Motors

Replacement rubber cap for oil tanks on the 2-stroke Chinese scooters.

rear pulley converter kit incl. clutch / clutch torque converter assembly

Low-cost Racing membrane block in OEM-quality, with 6 reeds. Suitable for all scooters with Piaggio engines from 1999 on. Suitable for all horizont...

Low-cost import exhaust system for scooters with horizontal Minarelli engines. Originally for 10” wheel scooters, but with a few minor modificati...

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...

Good quality 17.5mm carburettor from Naraku for Piaggio engines. Great alternative to those expensive top end brands with no compromise on quality...

Fan wheel in OEM-quality for Minarelli engines. Matches the dimensions of the original.

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Replacement front left indicator glass for Kymco Filly 50 and all Chinese-built 4-stroke scooters like the Rex RS450, Baotian BT50QT-9, Benzhou Cit...

Float bowl gasket for Keihin PWK carburettor.

Solid aluminum machined height adjuster kit. This height adjuster kit is 47mm. The strut can be mounted using the four holes onto the shock absorbe...

Aftermarket part for defective kick-start shafts. Item matches design and size of the original.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

New triple clamp for replacement after a crash or collision. Always renew bearings when installing a new triple clamp. 31mm diameter, 380mm in leng...

The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those who require a replacement due to cylinder or piston damage...

Naraku small end bearing [HD-Quality] - 12x16x13. Suitable for Minarelli and CPI, Generic, Keeway, Chinese-built 2-stroke engines with 12mm gudgeon...

Complete OEM-quality alternator for Minarelli-based 2-stroke engines, suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 v...

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Upper right side fairing in Silver. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper left side fairing in silver. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower left side fairing in Black. Please note that the faring does not fit Qingqi, Rex or Peugeot V-Clic.

Upper inner part leg shield in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Front mudguard in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Grip set (right and left) including right-hand throttle sleeve and rubber. Both grips have chromed end pieces and stops. This is ideal for customiz...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Brake shoes with reinforced compound for excellent wet weather performance. Supplied with a set of new shoe springs. Size: 110x25mm Generally for r...

Non-locking petrol cap for vehicles with the fuel tank under the seat. This petrol cap is generally locked or unlocked with a half rotation. Delive...

Dellorto 17.5 mm carburettor. For scooters with Minarelli or Minarelli-based engines. Recommended even for untuned engines, as the carburettor is e...

Malossi back plate for Minarelli The result is clean shifting and low loss of power, For tuned and original scooters.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku AC unrestricted Racing CDI with with improved/advanced mapping for GY6 50/125/150cc 4-stroke Chinese vehicles. Attention: NOT for REX, Qingq...

Brake pad set for double-piston callipers on Chinese-built 50/125/150cc 4-stroke machines. Unfortunately there is no information regarding which pa...

Small but great-looking coloured oil filler bolts in blue, red or gold. 1x blue bolt of the required size supplied with relevant O-ring.