Nova Motors

SLS hose clamp - 139QMB/QMA

Oil plug gasket for 139QMB/QMA.

SLS [secondary air system] gasket - 139QMB/A

Oil strainer bolt O-ring - 139QMB/QMA

Timing chain tensioner gasket for 139QMB/QMA.

Cylinder head gasket [50cc = 39mm] - GY6 50cc

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

Naraku Racing variator for all 50cc 2-stroke Minarelli engines with upright and horizontal cylinders. The surfaces offer optimal ratio change. This...

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Complete replacement engine for 125cc GY6 4-stroke 152QMI engines with a long block and rear disc brake. Long block models take an 743mm v-belt. Th...

Complete replacement engine for 125cc GY6 4-stroke 152QMI engines with a long block and rear disc brake. Long block models take an 835mm v-belt. Th...

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

M10x1.25mm nut for front belt pulleys. For Minarelli engines or other models with the same dimensions. (Thread on the variator side of the crank).

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

Little end bearing for 12mm gudgeon pin. This size is generally found on CPI, Keeway, Mawi, Longija, Generic engines etc. from 2003 on, as well as ...

Replacement drive belt suitable for GY6 125/150cc engines with long blocks. Dimensions: 835-20-30

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Rubber stops for the engine rockers. 2 items generally required when changing out.

Rubber centre stand stop for 125/150cc Chinese-built scooters. Suitable for most scooter types, but please check image against the original item.

Complete intake hose for the crankcase cover, with clamp. Suitable for crankcase covers on 125/150cc GY6 4-stroke engines.