Peugeot

Cylinder base gasket - GY6 50cc

Exhaust system with SLS connector in OEM quality. Only for vehicles with a factory-fitted SLS (see image 2).

The oil plug also measures the oil level and there is a measuring gauge on the dip stick, attached to the underside of the plug. Check item to be r...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

O-ring for isolators and intake manifolds. The isolator sits between the carb and the intake manifold and often causes poor engine running as a res...

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Fan cover for 50cc GY6 139QMB/QMA engines. Includes a cover cap with hole for checking the ignition timing.

This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals pr...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Set of 3 replacement sliding shoes for variator plates.

Alternator with cable connector/plug and Pick-up sensor. There are currently 2 different versions of this alternator. The difference is the insulat...

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Grip set including throttle sleeve, left and right. These can of course be ordered individually, just select your item from the list below. outer l...

Low-cost replacement plug for Chinese-built 4-stroke 50cc engines and all Kymco 50cc 4-stroke engines. Code: CR7HNS, matches NGK CR7HSA or C7HSA. F...

OEM quality without the SLS. For models with a factory-fitted SLS system, this needs to be blanked off. The positive side effect of this: the scoot...

Intake manifold for 24mm Naraku tuning carbs. Delivery includes spacer, clamp and gasket. This intake allows a free airflow through a 24mm carb, al...

Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Malossi Torque spring. Violet - +82%

Starter motor, suitable for all Chinese-built 4-stroke engines. This item can be used without a problem, even where the originally fitted item has ...

Polini Hi-Speed now available in a 4-stroke version set! Hi-Speed stands for better drive and smoother shifting. Supplied as shown with one set of ...