Peugeot

Timing chain tensioner gasket for 139QMB/QMA.

Cylinder head gasket [50cc = 39mm] - GY6 50cc

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Variator back plate.

Base washer for kick-start spindle. Mounts on the outside of the crankcase cover and sits under the circlip.

Kickstarter retaining circlip.

Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of ...

Front outer v-belt pulley. Suitable for GY6 139QMB/QMA engines, Kymco 4-stroke engines and Kymco models with horizontal cylinders. Outside diameter...

This plastic spacer prevents the kickstarter spring from rubbing against the crankcase cover, making it easier to turn over.

Kickstarter recoil spring.

Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 724-17.5

Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.

Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. Th...

Kickstart pinion gear clip for GY6 50cc 139QMB/QMA

Complete timing chain tensioner for 50cc GY6 4-stroke engines. Tensioner gasket not included and should be ordered separately.

Rubber thrust bearing for engine mounts. This version mounts to the flat thrust bearing on the mount.

Brake light switch for front brake discs. Suitable for GY6 50/125/150cc Chinese-built scooters.

Float bearing pin.

Screw for air cut-off valve and choke plate.

Screw for plastic carburettor cap with collar.