Peugeot

Replacement piston kit for 50cc standard cylinder kits for Honda engines. You receive a piston incl. piston rings, guedgeon pins and circlips.

12V replacement indicator relay as originally fitted in many scooter types. 90° offset 2-pin connection. Please check product image. Suitable for ...

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

Replacement tank cover in original design for Honda Bali, SA Vision, SFX, Wallaroo, Yupi; Malaguti Madison, MBK Forte, YP Skyliner and Yamaha Jog 5...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Standard starter motor with 11 teeth for 50cc Piaggio, Gilera, Peugeot (upright) and PGO scooters.

Malossi reinforced counter pressure torque spring - yellow = super strong

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Speed Belt by Polini. This v-belt features an aramid weave that makes it elastic and highly durable. Without doubt, one of the best v-belts in our ...

Polini Speed Clutch Bell. Better design than most original clutches and thus an ideal replacement for died down or misshapen originals. The improve...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Complete Naraku torque driver. Torque drivers, counter pressure springs and clutch. No need to disassemble the original. No more over-stressing the...

The most low-cost aftermarket clutch we offer. Even tuned engines can have issues with the clutch. Glazed plates, bad starting or vibrations are in...

Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutc...

Indicator relay 12V in original Chinese-built manufacturer quality. The plug fits 100% to the original connector on Kymco, SYM, Keeway, CPI and Gen...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Back plate in plastic for counter pressure spring. Results in clean shifting and low loss of power. For tuned and original scooters.

Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engine...

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi Torque spring. Blue - +106%

Malossi Torque spring. Green - +60%

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Aftermarket 70cc Malossi cast cylinder from Italian specialists Meteor. This very high-quality item is a cost-effective alternative to the original...

Dellorto 17.5 mm carburettor for original inlet ports (no additional adapters required). This carburettor is factory-equipped with a 90 main jet an...

New version of the micro-processor-controlled ignition box kit with aluminium racing CDI unit and converter. For better spark and adjustability. A ...

This mounting kit is required to fit 17.5mm Dellorto carburettors with slot connectors to the original inlet manifold and carburetors with clamp fi...

Malossi racing reeds flow-optimized reed block with carbon reeds. Carbon reeds give better responsiveness. Great when used with larger carburettors...

Malossi MHR carburettor kit contains: Dellorto 19mm PHGB carb and all necessary mounting parts. Originally for regulated scooter trophy series with...

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. 2x different ...

Malossi Racing clutch spring set. Springs suitable for original 3 shoe clutches 107mm. Set comprises 3 different strengths of spring: Green = light...

Low-cost replacement clutch bell from Malossi. Shaky drive from standstill could indicate an issue with the clutch bell. This will lead to damage i...

Counter-pressure springs set with 3 springs (15% green, 22% red and blue 30%) The counterpressure spring presses the drive belt onto the rear pulle...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Currently the best the market has to offer in high-end clutches. Top quality with endless set up possibilities. Adjustable pre-tension with various...

Very well-engineered and robust sports clutch from Malossi. Can be adjusted by using different weights of clutch springs. We offer different clutch...

Affordable replacement clutch shoes suitable for original or midly tuned 50cc engines, matches that of the original clutch dimensions. These are ou...

Top Racing offers you a cheap but very good clutch spring kit in three different weights. for original 3 shoe clutch and 107mm Top - Racing clutche...

Top quality racing clutch. Very sturdy design. For all originals and lightly tuned engines. Cheap alternative to replacing the original clutch.