Peugeot

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

SLS hose clamp - 139QMB/QMA

Oil plug gasket for 139QMB/QMA.

SLS [secondary air system] gasket - 139QMB/A

Oil strainer bolt O-ring - 139QMB/QMA

Timing chain tensioner gasket for 139QMB/QMA.

Cylinder head gasket [50cc = 39mm] - GY6 50cc

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Brake light switch for rear disc brakes on GY6 50/125/150cc Chinese-built scooters with rear disc brakes.

Repair kit for Chinese GY6 139QMB/QMA original carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idl...

Variator back plate.

Base washer for kick-start spindle. Mounts on the outside of the crankcase cover and sits under the circlip.

Kickstarter retaining circlip.

Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of ...

Front outer v-belt pulley. Suitable for GY6 139QMB/QMA engines, Kymco 4-stroke engines and Kymco models with horizontal cylinders. Outside diameter...

This plastic spacer prevents the kickstarter spring from rubbing against the crankcase cover, making it easier to turn over.

Kickstarter recoil spring.

Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.

Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. Th...

Kickstart pinion gear clip for GY6 50cc 139QMB/QMA

Complete timing chain tensioner for 50cc GY6 4-stroke engines. Tensioner gasket not included and should be ordered separately.

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

Malossi BigBore cylinder with 52mm bore in aluminium with hard chromed liner. The bore = 87.9cc capacity. Original head may be retained according t...

Of Tecnigas we have a very nice chrome exhaust processed in sport optics in the delivery program. A visual treat with 2-stroke look. Performance-wi...

CNC-machined replacement piston for 52.4mm Naraku cylinder with molybdenum coating. Comes complete with piston rings, oil scraper rings, gudgeon pi...

Complete cylinder gasket set for all 51mm and 52.4mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is ...

Complete cylinder gasket set for all 44mm Naraku or 44mm Chinese-built 4-stroke cylinder sets.

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. As a 4 stroke cylinder is effectively just a hole, the e...

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. The bore has been taken out to 52.4mm. The external diam...