Peugeot

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke. Note: In rare case...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Float bowl gasket for Keihin PWK carburettor.

Recoil spring for kickstarter levers on all Peugeot and Kymco engines.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...

Alternator stator for 50cc Peugeot horizontal engines. Stator unit incl. wire set and pick up. Ready-to-install!

6204 C3 bearing. Internal diameter 20mm, external diameter 47mm, thickness 14mm.

Oil pump control unit for all Peugeot Euro2 scooters with Dellorto carburettors. This 8 pin oil pump control unit corresponds to the manufacturers ...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 20mm. This is a must when using a larger ...

Replacement reed block with plastic reeds. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive...

Other kickstarter problems can be caused by the carrier sprocket teeth braking up and not gripping properly. Item matches the dimensions and design...

CDI attachment rubber for ignition boxes 37x22mm on 4-stroke Chinese-built scooters.

12V replacement indicator relay as originally fitted in many scooter types. 90° offset 2-pin connection. Please check product image. Suitable for ...