Peugeot

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Replacement reed block with Metal reed petals. Suitable for all scooters with upright Kymco, Sym or Peugeot engines.

Float bowl gasket for Keihin PWK carburettor.

Recoil spring for kickstarter levers on all Peugeot and Kymco engines.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

OEM-quality replacement carb with e-choke for various Honda, Kymco and SYM scooters. Main Jet: 70 Distance Between Mounting Holes: 35mm Air Filter ...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...

Heat shield replacement for 101 Octane exhausts.

Black replacement side stand for Peugeot Speedfight 1 +2 and Vivacity scooters up to 2008.

Low-cost scooter exhaust system in black with silver heat guard for all Peugeot models with upright cylinders. Very good fit and ideal for those lo...

Kickstarter problems can be caused by the carrier sprocket teeth braking up and not gripping properly. Item matches the dimensions and design of th...

Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

Other kickstarter problems can be caused by the carrier sprocket teeth braking up and not gripping properly. Item matches the dimensions and design...

Standard cylinder kit for vertical air-cooled Peugeot engines. The cylinder kit is identical in size and performance to the original, making it an ...

CDI attachment rubber for ignition boxes 37x22mm on 4-stroke Chinese-built scooters.

Vacuum-operated fuel tap for various Peugeot scooters.