Peugeot

Valve cover gasket [rubber] - GY6 50ccm

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all rear disc brake lever fittings. For added assurance, please che...

Throttle cable to fit most 4-stroke Chinese-built scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...

Rubber float bowl gasket for all original and Naraku NK200.01 carbs for GY6 50cc engines 1239 QMB/QMA.

Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Spark plug connector for all GY6 engines, 50-180cc.

Complete two-person seat unit, black, silver. Suitable for all vehicles with bodywork design similar to the Rex RS450, Baotian BT50QT-9, Benzhou Ci...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Speedo cable with retainer nut on upper and lower end for 2005 models on. Please check the original item against the product image. We offer 3 spee...

Alternator with cable connector/plug and Pick-up sensor. These alternators are currently available in 2 different versions. The difference is the i...

Exhaust manifold gasket for all Chinese-built 4-stroke and Kymco 50cc 4-stroke vehicles. Also suitable for all Naraku 4-stroke tuning cylinder kits...

Carburettor flange for mounting push-on carburettor (e.g.: Dellorto, PHBG) for derestricted and restricted Kymco inlet manifolds. Dimensions: 20mm ...

Rear brake disc caliper for various Peugeot, Derbi, Suzuki and Italjet scooters. Caliper is supplied complete with brake pads. Please always compar...

Manifold gasket for Yasuni Scooter exhausts TUB225 / YA225, TUB1001 / YA1001 and TUB1002 / YA1002.

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...

The Heidenau K61 Reinforced is a sports-oriented scooter tyre with very good handling and top direction changing. Great mileage and good wet weathe...

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Replacement reed block with Metal reed petals. Suitable for all scooters with upright Kymco, Sym or Peugeot engines.

Replacement front left indicator glass for Kymco Filly 50 and all Chinese-built 4-stroke scooters like the Rex RS450, Baotian BT50QT-9, Benzhou Cit...

Replacement taillight glass for various Derbi, Malaguti, MotorHispania, Peugeot, PGO and Gilera models. The glass is consistent with the dimensions...

Float bowl gasket for Keihin PWK carburettor.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original. Unlike the NGK BR7HS or Bosch WR5AC spark plugs...

Recoil spring for kickstarter levers on all Peugeot and Kymco engines.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Grip set (right and left) including right-hand throttle sleeve and rubber. Both grips have chromed end pieces and stops. This is ideal for customiz...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

Brake shoes with reinforced compound for excellent wet weather performance. Supplied with a set of new shoe springs. Size: 110x25mm Generally for r...

Non-locking petrol cap for vehicles with the fuel tank under the seat. This petrol cap is generally locked or unlocked with a half rotation. Delive...

Dellorto 17.5 mm carburettor. For scooters with Minarelli or Minarelli-based engines. Recommended even for untuned engines, as the carburettor is e...