Geniune

Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines...

Malossi reinforced counter pressure torque spring - yellow = super strong

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original.

Defective pickups can cause an engine not to spark. No need to replace the entire alternator, we offer this pickup module coil as a cost-effective ...

Piston ring set Airsal 50cc [Sport] - Minarelli horizontal AC

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Back plate in plastic for counter pressure spring. Results in clean shifting and low loss of power. For tuned and original scooters.

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Small but great-looking coloured oil filler bolts in blue, red, orange or gold. 1x gold bolt of the required size supplied with relevant O-ring.

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

Original replacement air filters for PGO Big Max In contrast to the original filter, this air filter is soaked in oil, which results in optimised f...

Piston ring set Airsal 50cc [T6-Racing] - Minarelli horizontal AC

Piston ring suitable for Airsal 50cc T6 Tech-Piston cylinders for Minarelli horizontal AC engines.

Small but great-looking coloured oil filler bolts in blue, red or gold. 1x blue bolt of the required size supplied with relevant O-ring.

Front disc brake pad set. Original replacement as factory-fitted. This brake pad is also compatible with Chinese scooters. For added assurance, ple...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Replacement taillight glass for various Derbi, Malaguti, MotorHispania, Peugeot, PGO and Gilera models. The glass is consistent with the dimensions...

Airsal 70cc cylinder gasket set Tech-Piston - horizontal Minarelli AC

Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

Little end bearings for Minarelli/Morini engines with 10mm gudgeon pins.