Geniune

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The kickstart carrier accompanies the kick starter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing ...

Piston ring set Airsal 70cc [T6 Tech-Piston] - Minarelli horizontal AC

Piston ring suitable for Airsal 70cc T6-Racing cylinders for Minarelli horizontal AC engines.

Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Vacuum-operated fuel tap for scooters with Chinese-built Minarelli-based engines (1E40QMB) e.g. CPI, Keeway etc. Please compare the image to your f...

Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines...

Malossi reinforced counter pressure torque spring - yellow = super strong

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Defective pickups can cause an engine not to spark. No need to replace the entire alternator, we offer this pickup module coil as a cost-effective ...

Piston ring set Airsal 50cc [Sport] - Minarelli horizontal AC

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Back plate in plastic for counter pressure spring. Results in clean shifting and low loss of power. For tuned and original scooters.

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Small but great-looking coloured oil filler bolts in blue, red, orange or gold. 1x gold bolt of the required size supplied with relevant O-ring.

Original replacement air filters for PGO Big Max In contrast to the original filter, this air filter is soaked in oil, which results in optimised f...

Piston ring set Airsal 50cc [T6-Racing] - Minarelli horizontal AC

Piston ring suitable for Airsal 50cc T6 Tech-Piston cylinders for Minarelli horizontal AC engines.