Geniune

Reinforced small end bearing by Top Racing. Especially the fragile bearing cage is more stable. Can be used in high-speed, high-end racing engines....

Folding black kickstarter. Low-cost replacement for Minarelli engines with horizontal cylinderss and Chinese-built 2-stroke Minarelli-based engines...

Naraku unrestricted CDI unit for horizontal Minarelli engines and some 2-stroke Chinese-built models. Not suitable for vehicles with a Ducati ignit...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engine...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attentio...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The kickstart carrier accompanies the kick starter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing ...

variator Cover Bolts. This decorative screw set contains all the screws for the variator cover in their respective lengths. Now in the new New Styl...

Piston ring set Airsal 70cc [T6 Tech-Piston] - Minarelli horizontal AC

Piston ring suitable for Airsal 70cc T6-Racing cylinders for Minarelli horizontal AC engines.

Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Vacuum-operated fuel tap for scooters with Chinese-built Minarelli-based engines (1E40QMB) e.g. CPI, Keeway etc. Please compare the image to your f...

Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Scooter tyre innertube with 90° bent valve for easier pressure checks. Suitable for the following sizes: 3.50-10 4.00-10 110/70-10 100/90-10 100/8...

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines...

Malossi reinforced counter pressure torque spring - yellow = super strong

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original.