Geniune

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...

Great price cylinder kit for horizontal air-cooled Minarelli engines. The cylinder kit is identical in size and performance to the original, making...

Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke. Note: In rare case...

Affordable replacement clutch shoes suitable for original or midly tuned 50cc engines, matches that of the original clutch dimensions. These are ou...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Starter motor for upright and horizontal 50cc Minarelli scooters.

Aftermarket oil pump in original design and flow. A defective oil filter can cause seizing, or damage the crank and bearings. Such a small part mak...

The most low-cost aftermarket clutch we offer. Even tuned engines can have issues with the clutch. Glazed plates, bad starting or vibrations are in...

Aftermarket cylinder head [combustion chamber diameter = 40mm] for 50cc horizontal Minarelli and CPI engines. Also suitable for Keeway, Generic, Ma...

This special tool for locking the front variator allows for quick and easy dismantling of the variator and is a must for every workshop.

This aftermarket air box is identical in design and construction to the original. Low-cost replacement for defect items or for returning to origina...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Folding black kickstarter. Low-cost replacement for Minarelli engines with horizontal cylinderss and Chinese-built 2-stroke Minarelli-based engines...

Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Vacuum-operated fuel tap for scooters with Chinese-built Minarelli-based engines (1E40QMB) e.g. CPI, Keeway etc. Please compare the image to your f...

Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

Defective pickups can cause an engine not to spark. No need to replace the entire alternator, we offer this pickup module coil as a cost-effective ...

Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.

Little end bearings for Minarelli/Morini engines with 10mm gudgeon pins.

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Float bowl gasket for Keihin PWK carburettor.

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Accompanying kickstarter part. Should also be replaced when changing the cog.

Cylinder head nut with M7 thread for all Minarelli and Minarelli-based engines, as well as other models with M7 threads on the cylinder stud bolts.

M10x1 nut for clutch bells for all Minarelli and Minarelli-based engines.