Phoenix 150 4T

Repair kit for 24mm Naraku carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster ...

Exhaust manifold gasket for all Chinese-built 4-stroke and Kymco 50cc 4-stroke vehicles. Also suitable for all Naraku 4-stroke tuning cylinder kits...

This Naraku cylinder gasket set contains all necessary gaskets from cylinder base upwards. Can be used on Naraku 4-stroke cylinders (NK600.52), but...

Naraku AC unrestricted Racing CDI with with improved/advanced mapping for GY6 50/125/150cc 4-stroke Chinese vehicles. Attention: NOT for REX, Qingq...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Naraku CNC-machined racing clutch bell for Kymco, Honda and Chinese-built maxi scooters. Ensures vibration-free running and the cooling grooves hel...

For technology-inspired tuning freaks we offer this reinforced GY6 Racing crank with a 2mm longer stroke. This is a no-frills product. 4-stroke pro...

Complete cylinder kit with all gaskets and small parts for fitting. This 150cc Naraku cylinder yields engine performance corresponding to the origi...

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Naraku Sports Contra Spring V.2 +2000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku sports clutch. Solid sports clutch that engages 1500-2000rpm higher than standard, meaning better drive and traffic light starts. Fiber rein...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Tuning CDI unit with no rev limiter from Naraku. Derestricts your scooter and makes it revvier. Check the connectors in the product image for accur...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more d...

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Piston kit for the Naraku 4-stroke cylinder (NK600.52), 150cc GY6 original cylinders and 150cc cylinder kits from other manufacturers. Set contains...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 743-18-20

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increas...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Naraku cylinder gasket set (61mm/170cc) 4-stroke

Naraku piston kit [61mm / 170cc] 4-stroke

Naraku cylinder gasket set (63mm/180cc) 4-stroke

Naraku piston kit [63mm / 180cc] 4-stroke

Naraku cylinder gasket set (58.5mm/160cc) 4-stroke

Naraku piston kit [58.5mm / 160cc] 4-stroke

Crankcase breather system by Naraku. A Simple, yet effective design by Naraku suitable for all 139QMB/QMA (GY6 50) Kymco and GY6 125- 180cc 4- stro...

Naraku Racing Variator for all GY6 engines with 125cc or above. Set comprises: variator, variator pressure plate, 10.3g sliders, CNC-machined outer...

160cc big bore kit for GY6 125/150cc + engines. The bore is 58.5 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters)...

Sports camshaft with altered timing for original and sports cylinder heads. For 4-stroke air-cooled 125-180cc Chinese imports (quads, scooters, Bug...

Naraku sports camshaft for original and sports cylinders. Longer valve opening time. Suitable for Chinese import 125/150cc scooters, quads etc. wit...

Tuning cylinder head with larger valves, larger ports and an enlarged 59mm combustion chamber. The cylinder head fits the NARAKU tuning cylinder se...

180cc big bore kit for GY6 based engines over 125/150cc. The bore measures 63 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engin...

170cc big bore kit for GY6 based engines over 125/150cc. The bore measures 61 mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engin...