Racer 150 4T

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Piston kit for the Naraku 4-stroke cylinder (NK600.52), 150cc GY6 original cylinders and 150cc cylinder kits from other manufacturers. Set contains...

Crankcase cover gasket for 125/150cc GY6 engines with 853mm v-belts.

Seemingly the most robust clutch on the market in top quality with adjustable pre-tension. We offer a clutch spring set with various spring weights...

Replacement clutch bell from Malossi. Shaky drive from standstill could indicate an issue with the clutch bell. This will lead to damage in the clu...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

Counter pressure spring by Polini for GY6 125/150cc, Kymco, Honda maxi scooters providing a 15% increase in pressure from the oriental spring and i...

The EVO clutch bell for various GY6, Kymco and Honda maxi scooters. Very lightweight and easy-spinning and CNC-machined from one solid block, unlik...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

Engine mount for 125-150cc GY6 engines. Please compare with product image.

Excellent value for money, quality scooter tyre. This midrange priced Quick Q007 tubeless tyre has a great parabolic profile design that offers goo...

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.

Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you r...

Complete engine gasket set for 125/150cc GY6 engines (152QMI). Contains all relevant gaskets. Cheaper than individual purchasing. Does not include ...

The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Variator back plate for GY6 125/150cc 4-stroke Chinese-built engines. This component corresponds to 100% of the original. Only for 15 mm tail shaft!

Complete left-hand fork leg for 125/150cc GY6 Chinese-built scooters. Ready to install. Stanchion tube diameter: 30mm, Length: 485mm Please careful...

Complete left-hand fork leg [brake calliper side] for 125/150cc GY6 Chinese-built scooters. Ready to install. Stanchion tube diameter: 30mm, Length...

Counterpressure spring mounting tool for convertor units 125-155mm outer diameter.

Malossi Racing clutch spring set. Springs suitable for various Maxi scooters with original 3 shoe clutches from 125-200cc. Set comprises 3 differen...

Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 743-18-20

Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increas...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Centre stand for 125/150cc Chinese-built 4-stroke scooters. There are differences between the location of the spring in individual centre stands, s...

Naraku cylinder gasket set (61mm/170cc) 4-stroke

Naraku piston kit [61mm / 170cc] 4-stroke

Naraku cylinder gasket set (63mm/180cc) 4-stroke

Naraku piston kit [63mm / 180cc] 4-stroke

Naraku cylinder gasket set (58.5mm/160cc) 4-stroke

Naraku piston kit [58.5mm / 160cc] 4-stroke

Clutch bell for GY6, Kymco, Honda, Malaguti Maxi-scooters. OEM-quality and great alternative to original items. Juddery starts or discoloured clutc...

Gearbox output shaft (wheel shaft) for GY6 125/150cc 4-stroke Chinese-built engines. This version is for vehicles with a rear drum brake. Shaft len...

Innertube with 45° angled valve for smaller sized wheels. Our tip: Always replace innertubes when changing tyres.

Very well-engineered and robust sports clutch from Malossi. Reinforced clutch springs and weight saving on the plates means better drive from light...

Centre stand for 125/150cc Chinese-built 4-stroke scooters. There are differences between the location of the spring in individual centre stands, s...

Jumpy drive and bad power transfer are usually signs that the clutch plates are either worn or glazed. The only solution is to change the plates. W...

Side stand for 125/150cc Chinese-built 4-stroke scooters. Fits most vehicles. As there are various bodywork designs, in some cases manufacturers wi...

Airsal 165cc [Sport] cylinder gasket set - GY6 152/157 QMI