Rally 50 LC 97-98 ZD4MDB

Replacement screw plug (filler) for 2 stroke Chinese import scooters.

Replacement rubber cap for oil tanks on the 2-stroke Chinese scooters.

Gear box cover gasket suitable for Minarelli engined scooter models.

Shaft oil seal Internal diameter: 20mm, External diameter: 42mm, Thickness/Depth: 8/9mm

Shaft oil seal Internal diameter: 20mm External diameter: 30/33.5mm Thickness/Depth: 6mm

Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinder. Great as a replacement for broken or damaged studs. One individual stud...

Arreche 25mm sealing ring for carbs with threaded flange.

Float bowl gasket for Keihin PWK carburettor.

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Deep groove ball bearing with dual-sided plastic seal. For instance suitable for water pump of 50cc Minarelli or 50-180cc Piaggio 2-stroke engines....

New style oil filler bolt for Minarelli - Red

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Accompanying kickstarter part. Should also be replaced when changing the cog.

Woodruff key with blunted edges for scooters with 50-180cc Piaggio 2-stroke engines. length=12mm, wide=3mm, high=5mm

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Locking spring for kick-starter carrier sprockets.

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

Water pump wheel for Minarelli 50LC engines. Matches the original water pump wheel.

Arreche 23.5mm sealing ring for carbs with threaded flange.

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Cylinder base gasket for horizontal Minarelli and 1E40QMB engines. For air and water-cooled engines.

Cylinder head nut with M7 thread for all Minarelli and Minarelli-based engines, as well as other models with M7 threads on the cylinder stud bolts.

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli engines and other models using the same size nut. Thread on the rotor side of ...