Rough house R50

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

Replacement piston for 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines with 10mm gudgeon pins. Kit comes with gudgeon pin, 2x...

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

Malossi Torque spring. Violet - +82%

Malossi clutch bell for tuned engines. Great racing component. Precision-balanced with cooling grooves in the outer ring for temperature reduction ...

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Replacement electronic control unit for the Malossi inner rotor ignition unit for scooters with Minarelli or Piaggio 2-stroke engines, as well as g...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...

Malossi 50CC MHR Cylinder kit. One of the strongest with 50cc capacity, set up for 10mm gudgeon pins. 6 over flow ports and 3-piece outlet port. Ti...

Malossi Multivar variator for great drive and shifting, as well as increased top end. Original drive belt can be retained. Excellent Malossi qualit...

Malossi MHR Team carburettor kit. MHR (Malossi Hyper Racing) team stands for high end racing for the Malossi Team racing scooters. The 21mm PHGB De...

Malossi MHR carburettor kit for solid power curve right up to the top end. Dellorto 19mm PHBG is a solid starting point for mid to high end cylinde...

Malossi reinforced counter pressure torque spring - yellow = super strong

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Digital micro-processor-controlled Racing ignition system from Malossi with internal rotor and dynamic ignition point adjustment. Engine revs notic...

The following description is generated automatically by Google Translation Service. A reinforced gear cover worth it for smaller tuning steps from ...

Complete rear overrange kit from Malossi. Only for use with the overrange kit for Minarelli engines with a long engine block. Complete rear unit su...

Malossi 50cc cast iron cylinder with sharper ignition timing, with approx. 3bhp increase over the original. Cylinder includes all parts, gaskets, p...

Back plate in plastic for counter pressure spring. Results in clean shifting and low loss of power. For tuned and original scooters.

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi Torque spring. Blue - +106%