Sachs

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

SLS Exhaust system gasket - 130QMB/A

SLS [secondary air system] gasket - 139QMB/A

Cylinder base gasket - GY6 50cc

Crankcase cover gasket [10”-669mm] - GY6 50cc

M10x1 nut for clutch bells for all Minarelli and Minarelli-based engines.

Exhaust system with SLS connector in OEM quality. Only for vehicles with a factory-fitted SLS (see image 2).

Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke eng...

Brake pad set for single piston callipers on Chinese-built 50/125/150cc 4-stroke machines. Unfortunately there is no information regarding which pa...

The oil plug also measures the oil level and there is a measuring gauge on the dip stick, attached to the underside of the plug. Check item to be r...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Structurally, the original V-belt pulley with a star-shaped carrier is an inferior component. The star shim is just too thin for the forces acting ...

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Att...

O-ring for isolators and intake manifolds. The isolator sits between the carb and the intake manifold and often causes poor engine running as a res...

This replacement pulley for standard motors corresponds in shape and dimensions to the original and provides an inexpensive alternative when pulley...

Complete starter motor incl. cables, ready to install. Number of teeth: 9 Diameter Shaft: 9mm Distance of mounting holes: 65mm

Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the orig...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Plastic fan wheel air cooling for CPI, Keeway, Generic, Mawi, Longija and other Chinese-built 2-stroke engines.

Complete tail light bulbs included. E-certificate. Suitable for all Chinese-built 4-stroke vehicles with vehicle design like the Rex RS450, Baotian...

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Fan cover for 50cc GY6 139QMB/QMA engines. Includes a cover cap with hole for checking the ignition timing.

This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals pr...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

Kevlar belt from Polini. The most durable v-belt Polini offers has additional aramid fibre inlays that make this belt extremely resistant to tearin...

Replacement drive belt suitable for vehicles with 12” wheels. Dimensions: 729-17.7-30

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

NARAKU sports variator for 2-stroke CPI, Keeway, Generic models, as well as all Chinese Minarelli-based replica engines. When calibrated, this vari...

Set of 3 replacement sliding shoes for variator plates.

Standard replacement drive belt suitable for vehicles with 10” wheels. Dimensions: 669-18-30

Original CDI unit for vehicles with a double connector in the CDI as factory-fitted. For assurance, please check the image for comparison. Also sui...

Alternator with cable connector/plug and Pick-up sensor. There are currently 2 different versions of this alternator. The difference is the insulat...

Complete steering bearing kit for some low-cost and Chinese-built scooters, incl. shells, ball races and locking nuts.

It is very easy to lose petrol caps! At the petrol station, broken keys or just dropped never to be found again. Instead of buying a new set of key...

Front alloy wheel for disc brake models. Suitable for all scooter models with 2.15x10 wheels. The model pictured is a factory-fitted item on Chines...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Suitable for all standard production handlebars 22mm.

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...