Schwinn

Timing chain for GY6 4-stroke engines 152/157 QMI with 125 or 150cc. Chain has 45 links.

Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releas...

Complete steering bearing set for 125/150cc 4-stroke Chinese-built scooters The manufacturer used a tapered roller bearing as the lower bearing and...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Complete oil pump for 125/150cc GY6 engines. Delivery as shown.

Standard camshaft for 125cc and 150cc GY6 engines as originally factory-fitted.

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/42 teeth.

Primary gear shaft for Chinese 125/150cc scooters with the 152/157QMI engine. This is where the clutch is mounted. This gear has 15 teeth as per or...

Gearbox output shaft - long version. For rear wheel mounting. Total length: 197mm, used for vehicles with additional swinging arm on the right-hand...

Isolator between carb and intake manifold.

Brake light switch for rear disc brakes on GY6 50/125/150cc Chinese-built scooters with rear disc brakes.

Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.

Repair kit for Chinese GY6 139QMB/QMA original carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idl...

Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. S...

Folding kickstarter lever for 125/150cc GY6 4-stroke Chinese-built engines.

Standard CDI ignition unit as factory-fitted.

Complete timing chain tensioner suitable for 125/150cc GY6 Chinese-built 4-stroke engines. Delivery includes tensioner tool, which is only to be us...

Crank seals for 125/150cc GY6 4-stroke engines. Set contains 4 seals for left and right-hand side, as well as for the gearbox output shaft.

Replacement aftermarket clutch bell. Already blued clutch bells tend mean slipping and deforming of the plates. This means the bell cannot run true...

Aftermarket front brake disc. 3-point mounting and external diameter of 220mm. Supplied as shown.

Complete front brake calliper for 125/150cc Chinese-built GY6 scooters, incl. brake pads. Those callipers are factory-fitted as either 1 or 2 pisto...

Variator back plate.

Base washer for kick-start spindle. Mounts on the outside of the crankcase cover and sits under the circlip.

Kickstarter retaining circlip.

Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of ...

Front outer v-belt pulley. Suitable for GY6 139QMB/QMA engines, Kymco 4-stroke engines and Kymco models with horizontal cylinders. Outside diameter...

This plastic spacer prevents the kickstarter spring from rubbing against the crankcase cover, making it easier to turn over.

Kickstarter recoil spring.

Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.

Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. Th...

Baotian ignition system for approx. 30mph restricted vehicles. Road legal. Not suitable for derestricting vehicles as no Vehicle Type Approval. Att...

Kickstart pinion gear clip for GY6 50cc 139QMB/QMA

Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting iss...

Complete timing chain tensioner for 50cc GY6 4-stroke engines. Tensioner gasket not included and should be ordered separately.

Complete hydraulic system for disc brakes on GY6 125/150cc Chinese-built scooters with rear disc brakes. Set includes: hand brake cylinder with lev...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Fits all standard 125/150cc GY6 Chinese-built scooter handlebars.

This brake system consists of a hand brake cylinder (hand brake pump) with lever, hose, calliper with pads and brake light switch. The brake system...

Steel-braided hoses for 125/150cc Chinese 4-stroke scooters with rear disc brake. Steel braided hoses are brake hoses, surrounded by a woven steel ...

Rear brake line for 125 and 150cc 4-stroke Chinese scooters with rear disc brake. The design matches that of the standard system. For added assuran...

Complete kit of all variator components for all 125cc or 150cc GY6 4-stroke Chinese-built 152/157QMI engines. The kit contains a variator, a set of...

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

Complete rocker mechanism including all individual parts ready fitted. For all GY6 125/150cc 152/157QMI engines.

Valve cover for cylinder heads without SLS. For all GY6 125/150cc 152/157QMI engines.

Complete crank with bearings. Standard replacement crank for all 125 and 150cc GY6 4-stroke engines e.g.: Baotian, Rex, Peugeot Zoom Up, Keeway etc.

Malossi BigBore cylinder with 52mm bore in aluminium with hard chromed liner. The bore = 87.9cc capacity. Original head may be retained according t...