Schwinn

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

Valve cover for GY6 125/150cc 4-stroke 152/157QMI engines WITH SLS system. The valve cover is ready to install and delivered as shown. Valve cover ...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Replacement drive belt suitable for GY6 125/150cc engines with long blocks. Dimensions: 835-20-30

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Rubber stops for the engine rockers. 2 items generally required when changing out.

Rubber centre stand stop for 125/150cc Chinese-built scooters. Suitable for most scooter types, but please check image against the original item.

Complete intake hose for the crankcase cover, with clamp. Suitable for crankcase covers on 125/150cc GY6 4-stroke engines.

Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine...

Outer v-belt pulley for GY6 125/150cc 4-stroke Chinese-built engines.

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Original fan cover for 125/150cc GY6 4-stroke Chinese-built engines.

Alternator stator for GY6 125/150cc machines. There are many variations of this alternator of these engines. They can however be quite easy to iden...

Complete air filter element [type 1] for 125/150cc Chinese GY6 4-stroke scooters. As there are so many variations to this scooter, please check the...

Complete shock unit for 125/150cc Chinese-built 4-stroke scooters, chromed. Non-adjustable. Length: 335mm, please ensure you are ordering the corre...

Complete aftermarket piston for GY6 150 4-stroke Chinese-built models. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pi...