SR 50 LC 97-99 [Minarelli] ZD4MZ

Many scooters from the middle East use different types of carburettor. The carb is a Mikuni copy, but uses an E-choke/cold start valve. You can onl...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Naraku unrestricted CDI unit for horizontal Minarelli engines and some 2-stroke Chinese-built models. Not suitable for vehicles with a Ducati ignit...

Naraku sport clutch spring set for all Minarelli original and Naraku sports clutches. 3 different graded spring rates supplied, with the rpm value ...

Outer variator pulley from NARAKU. The pulley corresponds to the shape and dimensions of the original. A cost-effective alternative when pulleys ar...

Cylinder studs including special nuts with M7 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better r...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinder. Great as a replacement for broken or damaged studs. One individual stud...

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...