Suzuki

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Naraku Sports Contra Spring V.2 +1000 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better r...

Exhaust manifold gasket with accurate fit to the factory installed exhaust system.

Repair kit for 24mm Naraku carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster ...

Everyday 10 inch tubeless tyre for almost any road conditions and great value for money! This is a true allrounder, offering good grip from its dee...

Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x23mm For rear brake use. ...

Replacement piston for 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines with 10mm gudgeon pins. Kit comes with gudgeon pin, 2x...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines, CPI, Keeway, Generic, Mawi, Longija, Morini engines, April...

Low-cost Racing membrane block in OEM-quality, with 6 reeds. Suitable for all scooters with Piaggio engines from 1999 on. Suitable for all horizont...

Ignition coil with lead for all 50cc Morini engines. Matches original item. Good value for money. 2 Pins

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...

Malossi Multivar 2000 “maxi-torque” converter for larger capacity machines. Sinter metal, self-lubricating anti-friction bush with coated-steel...

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Float bowl gasket for Keihin PWK carburettor.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original. Unlike the NGK BR7HS or Bosch WR5AC spark plugs...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

NARAKU sports variator for Morini engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of the o...

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Malossi back plate for Minarelli The result is clean shifting and low loss of power, For tuned and original scooters.