SYM (Sanyang)

Carbon-look aluminium kick-starter with solid kicker head, suitable for various Peugeot scooters. Great optical detail.

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Replacement left-hand mirror in original design with E-certification for PGO Big Max and some SYM scooters. Cheaper alternative to expensive origin...

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

Complete steering bearing set with upper and lower bearing shells and bearings.

Scooter tyre innertube with 90° bent valve for easier pressure checks. Our Tip: Always replace the innertube when changing the tyre. Suitable for ...

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Dimensions: 738x1...

The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those looking for a replacement for a damaged cylinder or piston...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Set of 3 replacement sliding shoes for variator plates.

Malossi Torque spring. Violet - +82%

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...

Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hamm...

Newly revamped Polini counterpressure springs, in white and blue. Pressure increases make these a great option for light tuning: White: 7% Blue: 15...

Malossi clutch bell for tuned engines. Great racing component. Precision-balanced with cooling grooves in the outer ring for temperature reduction ...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Reinforced small end bearing by Top Racing. Especially the fragile bearing cage is more stable. Can be used in high-speed, high-end racing engines....