TGB

Naraku small end bearing [HD-Quality] - 10x14x13. Suitable for Minarelli and Morini engines with 10mm gudgeon pin.

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

Replacement cylinder head for 50cc Morini AC cylinders. This cylinder head is manufactured to, and meets, OEM standards and quality of the vehicle ...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right crank bearings in metal cage and relevant shaft seals. Only bearings wit...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Naraku CNC-machined racing clutch bell for Kymco, Honda and Chinese-built maxi scooters. Ensures vibration-free running and the cooling grooves hel...

Naraku Racing Intake V.2 including 2 adapters for all common carburettors. The 23mm adapter is suitable for all Dellorto 10-21mm and Arreche 17-21m...

Great quality Naraku crank for TGB and Pegasus scooters. Corresponds to the original crankshaft dimensions. Please note: left-hand thread on variat...

Naraku quality shaft seals for various Kymco, SYM and Honda scooters. Shaft seals are required on the rear of the convertor and seal in the convert...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Morini AC engines. Delivery as shown, including: piston rings, gudg...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines.

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Complete Naraku torque driver. Torque drivers, counter pressure springs and clutch. No need to disassemble the original. No more over-stressing the...