Typhoon 50 USA

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

Malossi clutch bell for tuned engines. Great racing component. Precision-balanced with cooling grooves in the outer ring for temperature reduction ...

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

Malossi Torque spring. Violet - +82%

Malossi ignition system with coil and control unit for scooters with Piaggio engines without immobiliser. Simply swaps out with the original and ac...

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Malossi Multivar variator for great drive and shifting, as well as increased top end. [computer-optimized running surface] Original drive belt can ...

Malossi Multivar variator for great drive and shifting, as well as increased top end. Original drive belt can be retained. Excellent Malossi qualit...

MHR (Malossi Hyper Racing) Team products are pure racing components. Large diameter variator for use with overrange drive belt and convertor for ex...

Malossi MHR variator especially for older Piaggio models up to 1998. 16x13 weights with special surfaces as on the larger 19x15.5g versions. MHR te...

Back plate in plastic for counter pressure spring. Results in clean shifting and low loss of power. For tuned and original scooters.

Malossi reinforced counter pressure torque spring - yellow = super strong

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi Torque spring. Green - +60%

Malossi Torque spring. Blue - +106%

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. Guide grooves...

Malossi CDI units derestrict the factory-restricted CDI units. Malossi RPM Control Racing CDI with solid spark (35,000-50,000V) right through to th...

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed, but should only really be used with a tuned engin...

MHR TEAM VL16 reed block straight from the race track. Optimized for the big bore cylinder kits with 28mm carbs. 42% larger valve with 0.3mm reeds....

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow.Straight from the Malossi MHR racing departme...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 different thickn...

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed. Longer ratios are only really suitable on tuned e...

Malossi replacement piston 47mm diameter with rings, gudgeon pin and circlips for the 70cc MHR Replica kit for scooters with upright Piaggio and Pe...