Typhoon 50 4t 12-22

Malossi replacement piston 47mm diameter with rings, gudgeon pin and circlips for the 70cc MHR Replica kit for scooters with upright Piaggio and Pe...

Malossi ignition system with coil and control unit for scooters with Piaggio engines without immobiliser. Simply swap out with the original and ach...

High rev bearing set from Malossi suitable up to high-end tuned Piaggio engines. Half-open polyamide cage prevents overheating. Dimensions: 20x52x1...

Malossi all-in-one 25mm MHR carburettor set with suitable filter pre-configured for MHR cylinders. 25mm is the optimal variant for high end cylinde...

Malossi ignition system with coil and control unit for scooters with Piaggio engines without immobiliser. Simply swap out with the original and ach...

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Malossi MHR intake manifold with short opening and straight connection. 21/24.5mm variant has a 21mm opening and the 24.5mm carb connection for MHR...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for PHBG 15...

Replacement electronic control unit for the Malossi inner rotor ignition unit for scooters with Minarelli or Piaggio 2-stroke engines, as well as g...

High rev bearing sets from Malossi up to high-end tuned Piaggio engines. Outer ring reduced to 10.8mm for better lubrication. Ball bearings with 8x...

Malossi intake manifold with short opening and angled connection. 22/28mm variant has a 22mm opening and the 28mm connection has the width of the o...

Malossi MHR intake manifold with short opening and straight connection. 26/30mm variant has a 26mm opening and the 30mm carb connection for MHR Tea...

Malossi intake manifold with short opening and angled connection. 20.5/23mm variant has a 20mm opening and the 23mm connection has the width of the...

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. Guide grooves...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

MHR TEAM VL16 reed block straight from the race track. Optimized for the big bore cylinder kits with 28mm carbs. 42% larger valve with 0.3mm reeds....

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed, but should only really be used with a tuned engin...

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed. Longer ratios are only really suitable on tuned e...

Very high quality Malossi crank. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and moves the power band ...

Malossi MHR carburettor kit contains Dellorto 19mm PHGB carb and all necessary mounting parts. Originally for regulated scooter trophy series with ...

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed. Longer ratios are only really suitable on tuned e...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 different thickn...

Malossi Special Belt is a high quality and low-slip belt for use on standard and tuned sports engines. Good grip means performance and minimal slip...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Malossi High Tech drive belt for racing or tuned engines. Cheaper alternative to the original. Aramid reinforcements are tear resistant even under ...

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28-30mm carb connection for MHR ...

Malossi MHR Team carburettor kit. MHR (Malossi Hyper Racing) team stands for high end racing for the Malossi Team racing scooters. The 21mm PHGB De...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow.Straight from the Malossi MHR racing departme...

Malossi MHR Racing T6 offers water-cooled performance for air-cooled cylinders. Strong performance cylinder for AC engines. Using the Team exhaust ...

Malossi 50cc cast iron cylinder with sharper ignition timing, with approx. 3bhp increase over the original. Cylinder includes all parts, gaskets, p...

Interal rotor ignition system save weight, thus giving improved performance. Works together with a micro-processor-controlled digital ignition, mak...