Vento

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

NARAKU sports variator for 2-stroke CPI, Keeway, Generic models, as well as all Chinese Minarelli-based replica engines. When calibrated, this vari...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Tuning CDI unit with no rev limiter from Naraku. Derestricts your scooter and makes it revvier. Check the connectors in the product image for accur...

Naraku CNC-machined racing clutch bell. This new generation Naraku clutch bell competes with the MHR Malossi and Polini Evo bells. Distortion is al...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more d...

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Piston kit for the Naraku 4-stroke cylinder (NK600.52), 150cc GY6 original cylinders and 150cc cylinder kits from other manufacturers. Set contains...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

Great quality Naraku crank for Euro 2 Minarelli replica Chinese-built engines. Corresponds to the original crankshaft dimensions. 16mm crank shaft ...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

Reinforced starter motor freewheel without starter sprocket, from Naraku. For original and tuned scooters with Minarelli-based, Chinese-built engin...

Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinder. Great as a replacement for broken or damaged studs. One individual stud...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Special belt size...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on 70cc Naraku 2-stroke cy...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 743-18-20

Piston ring set for 70cc Naraku cylinder kit for 1E40QMB engines with 12mm gudgeon pin.

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Minarelli 1E40QMB engines. Delivery as shown, including: piston rin...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These Naraku cylinder gasket sets contain all the necessary gaskets from the base gasket upwards and can be optionally used on the Naraku 2-stroke ...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increas...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

Replacement variator for 50cc 2-stroke CPI, Keeway, Generic engines and Chinese-built Minarelli-based 50cc 2-stroke engines. The weight tracks corr...

Naraku Racing Variator, V.2 for all 50cc 2-stroke CPI, Keeway, Generic engines with a 16mm tail shaft. The weight surfaces are moved very far to th...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...