Vespa Modern

Malossi ignition system with coil and control unit for scooters with Piaggio engines without immobiliser. Simply swap out with the original and ach...

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Malossi Special Belt is a high quality and low-slip belt for use on standard and tuned sports engines. Good grip means performance and minimal slip...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Malossi MHR intake manifold with short opening and straight connection. 21/24.5mm variant has a 21mm opening and the 24.5mm carb connection for MHR...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for PHBG 15...

Replacement electronic control unit for the Malossi inner rotor ignition unit for scooters with Minarelli or Piaggio 2-stroke engines, as well as g...

High rev bearing sets from Malossi up to high-end tuned Piaggio engines. Outer ring reduced to 10.8mm for better lubrication. Ball bearings with 8x...

Malossi large pore sports air filter. Great filtering performance in fire-resistant foam. For optimal performance when used on the road, we recomme...

Malossi intake manifold with short opening and angled connection. 22/28mm variant has a 22mm opening and the 28mm connection has the width of the o...

Malossi MHR intake manifold with short opening and straight connection. 26/30mm variant has a 26mm opening and the 30mm carb connection for MHR Tea...

Malossi intake manifold with short opening and angled connection. 20.5/23mm variant has a 20mm opening and the 23mm connection has the width of the...

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. Guide grooves...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

MHR TEAM VL16 reed block straight from the race track. Optimized for the big bore cylinder kits with 28mm carbs. 42% larger valve with 0.3mm reeds....

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed. Longer ratios are only really suitable on tuned e...

Very high quality Malossi crank. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and moves the power band ...

Malossi MHR carburettor kit contains Dellorto 19mm PHGB carb and all necessary mounting parts. Originally for regulated scooter trophy series with ...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 different thickn...

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Malossi MHR X K Belt special drive belt for the MHR Team Overrange 2008 variator. Speical inter-woven aramid inserts means greater durability and p...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28-30mm carb connection for MHR ...

Malossi large pore sports air filter. Great filtering performance in fire-resistant foam.For optimal performance when used on the road, we recommen...

Malossi MHR Team carburettor kit. MHR (Malossi Hyper Racing) team stands for high end racing for the Malossi Team racing scooters. The 21mm PHGB De...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow.Straight from the Malossi MHR racing departme...

Malossi MHR Racing T6 offers water-cooled performance for air-cooled cylinders. Strong performance cylinder for AC engines. Using the Team exhaust ...

Malossi 50cc cast iron cylinder with sharper ignition timing, with approx. 3bhp increase over the original. Cylinder includes all parts, gaskets, p...

Interal rotor ignition system save weight, thus giving improved performance. Works together with a micro-processor-controlled digital ignition, mak...

Malossi CDI units derestrict the factory-restricted CDI units. Malossi RPM Control Racing CDI with solid spark (35,000-50,000V) right through to th...

Road legal update for the MHR Malossi cylinder. MHR Replica is a 70cc aluminium cylinder with hard chromed cylinder liner provided the best thermal...

Malossi 50CC MHR Cylinder kit. One of the strongest with 50cc capacity. 6 over flow ports and 3-piece outlet port. Timing allows for a full cheek c...

Malossi MHR carburettor kit for solid power curve right up to the top end. Dellorto 19mm PHBG is a solid starting point for mid to high end cylinde...