Vespa Modern

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for PHBG 15...

Malossi MHR overrange kit with 19x15.5 weights for quiet running and simple tuning. The angle and surface of the rollers give yet more performance ...

High rev bearing sets from Malossi up to high-end tuned Piaggio engines. Outer ring reduced to 10.8mm for better lubrication. Ball bearings with 8x...

Malossi intake manifold with short opening and angled connection. 22/28mm variant has a 22mm opening and the 28mm connection has the width of the o...

Malossi intake manifold with short opening and angled connection. 20.5/23mm variant has a 20mm opening and the 23mm connection has the width of the...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Carrier sprocket that matches the dimensions of the original.

Fan cover, right-hand side for scooters with Piaggio AC engines.

Naraku heavy-cheeked racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and the p...

Great quality Naraku crankshaft for scooters with water- or air-cooled Piaggio engines. Corresponds to the original crank dimensions. Delivery incl...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

The Heidenau K62 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Thanks to the high-quality materials used in thi...

The Heidenau K58 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Thanks to the high-quality materials used in thi...

Woodruff key with blunted edges for scooters with 50-180cc Piaggio 2-stroke engines. length=12mm, wide=3mm, high=5mm

Replacement centre stand axle for Piaggio NTT, Stalker, Sfera, Typhoon and NRG scooters. Axle is 114mm long (without bolts) and has a diameter of 1...

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricate...

Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricate...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Low-cost scooter exhaust system in black with silver heat guard for all models with Piaggio engines. Very good fit and ideal for those looking for ...

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...

Top quality cylinder kit by Naraku. An extra emphasis was put on the piston quality. The Naraku piston has a molybdenum coating, so that cylinder a...

Very large inlet cross section from the patented V-Force 3 system by Tassinari in a Top Performances reed block. Rather than the standard 4 valves,...

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Replacement membrane block with glass fibre membranes. This is safer should they break off into the cylinder, where they will simply be spat out th...

Solid aluminium machined riser kit. The lift kit is 40mm. The scooter looks great and you get a sportier seating position. An absolute must for all...

Solid aluminium machined riser kit. The lift kit is 40mm. The scooter looks great and you get a sportier seating position. An absolute must for all...

Solid aluminium machined riser kit. The lift kit is 40mm. The scooter looks great and you get a sportier seating position. An absolute must for all...