Yamaha

Shaft oil seal Internal diameter: 20mm, External diameter: 42mm, Thickness/Depth: 8/9mm

Replacement taillight glass for Yamaha BWs Bump 50 (97-98), CW RS Spy 50 (95-98), BWs Next Generation 50 (97-06) as well as MBK CW RS Booster Next ...

Replacement taillight for Yamaha BWs Original 50 (99-03), BWs 50 R (01), CW BWs Original 50 (02), CW BWs SP Original 50 (02), BWs Naked 50 (03), CW...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have h...

Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricate...

Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.

Replacement indicator glass front and rear for various Derbi, Rieju, Yamaha and MBK scooters and geared mopeds. The turn signal lens corresponds to...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Replacement clutch bell for lightly-tuned engines. Matches the dimensions of the original (107mm). Cheapest clutch we offer, but definitely worth t...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

Low-cost seal for membrane blocks on upright 50cc 2-stroke Minarelli engines. Please note: generally an upper and lower seal is required.

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circ...

Starter relay for various MBK, Piaggio and Yamaha 2- and 4-stroke Scooters. Can instead of OEM No:.. 1nt be 02501500 / 1nt-h1940-00 / 29u-81950-93 ...

Latest variator technology from Polini for untuned 50cc engines for improved acceleration and higher top speed. Polini evo sliders make for better ...

Malossi large pore sports air filter. Great filtering performance in fire-resistant foam.For optimal performance when used on the road, we recommen...

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

Carbon Power reeds for original reed blocks for scooters with Minarelli engines. Kinder to engines if they break-up. 2x carbon reeds supplied. Chea...

Rectifier / Controller changes the AC into DC on a 12V board. This prevents bulbs from burning out. Exposure to high temperatures means bulbs often...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Piston ring suitable for Airsal 70cc T6-Racing cylinders for Minarelli upright engines.

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

The bigger brother to the Naraku Racing Variator: the Naraku High Speed Racing V.2. The variator surface has been blast-hardened with glass beads, ...