Yamaha

Carbon Power reeds for original reed blocks for scooters with Minarelli engines. Kinder to engines if they break-up. 2x carbon reeds supplied. Chea...

Rectifier / Controller changes the AC into DC on a 12V board. This prevents bulbs from burning out. Exposure to high temperatures means bulbs often...

This is a specially made Variator locking tool for blocking the variator during assembly and dismantling. Easy handling makes work fast and profess...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for MHR Tea...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow. Straight from the Malossi MHR racing departm...

Malossi Racing clutch spring set. Springs suitable for original clutches with 3 shoes. Set comprises 3 different spring strengths: black = light (t...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

M10x1 nut for clutch bells for all Minarelli and Minarelli-based engines.

Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke eng...

Buzzetti universal 3-point puller for alternator rotors. The 3 screws included in the delivery are simply screwed into the holes in the rotor. Then...

Structurally, the original V-belt pulley with a star-shaped carrier is an inferior component. The star shim is just too thin for the forces acting ...

This replacement pulley for standard motors corresponds in shape and dimensions to the original and provides an inexpensive alternative when pulley...

Complete starter motor incl. cables, ready to install. Number of teeth: 9 Diameter Shaft: 9mm Distance of mounting holes: 65mm

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

NARAKU sports variator for 2-stroke CPI, Keeway, Generic models, as well as all Chinese Minarelli-based replica engines. When calibrated, this vari...

Reinforced Malossi MHR torque spring (White) for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...

Currently the best the market has to offer in high-end clutches. Top quality with endless set up possibilities. Adjustable pre-tension with various...

The counterpressure spring presses the drive belt onto the rear pulley. A change is needed when tuning, the power increases. The torque spring work...