Yamaha

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attentio...

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

Replacement rubber cap for oil tanks on the 2-stroke Chinese scooters.

Low-cost Racing membrane block in OEM-quality, with 6 reeds. Suitable for all scooters with Piaggio engines from 1999 on. Suitable for all horizont...

Fan wheel in OEM-quality for Minarelli engines. Matches the dimensions of the original.

Variator cover gasket suitable for scooters with long Minarelli horizontal engines.

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Cylinder gasket set for 50cc air-cooled Minarelli engines. Suitable for original and aftermarket 50cc cylinders.

Carbon Power reeds for original reed blocks for scooters with Minarelli engines. Kinder to engines if they break-up. 2x carbon reeds supplied. Chea...

Replacement screw plug (filler) for 2 stroke Chinese import scooters.

Alternator stator 12-pole for Minarelli engines built as of 2003 with Ducati ignition. Suitable for Ducati ignitions only.

Gear box cover gasket suitable for scooters with Minarelli horiz. AC short version engine.

Reinforced clutch bell blocking tool. The pins grasp the bell and the nut can easily be removed. Attention! Minarelli engines have different sized ...

Ride height adjuster kit in solid aluminium, 37mm. Great sporty look. Suitable for horizontal Minarelli engines. Available in various colours. Plea...

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli engines and other models using the same size nut. Thread on the rotor side of ...

Starter magnetic switch as mounted on the original vehicle. Suitable for many MBK/Yamaha and Peugeot scooters. Defective relays are often the cause...

Well priced replacement cylinder head for 50cc original cylinders.d=40mmSuitable for all air-cooled Minarelli engines with horizontal cylinders and...

Good quality crank for horizontal 50cc Minarelli AC and LC engines. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders...

Well priced 50cc replacement cylinder kit including all necessary parts for installation. Performance as on original item. Taiwanese manufactured a...

M10x1.25mm nut for front belt pulleys. For Minarelli engines or other models with the same dimensions. (Thread on the variator side of the crank).

Right-hand crank case (alternator side) for all horizontal Minarelli AC and LC engines. Cheaper alternative to complete set of cases and low risk. ...