Yamaha

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing ...

Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines, CPI, Keeway, Generic, Mawi, Longija, Morini engines, April...

Fan cover for CPI, Generic, Keeway, Mawi, Longija right-hand side fans and air-cooled Minarelli engines.

The most durable v-belt Polini offers has additional aramid fibre inlays that make this belt extremely resistant to tearing. This is not Polini’s...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Malossi reinforced counter pressure torque spring - yellow = super strong

Replacement rubber cap for oil tanks on the 2-stroke Chinese scooters.

rear pulley converter kit incl. clutch / clutch torque converter assembly

Low-cost Racing membrane block in OEM-quality, with 6 reeds. Suitable for all scooters with Piaggio engines from 1999 on. Suitable for all horizont...

Naraku adjustable camshaft wheel for timing adjustments. Careful installation required to avoid valve contact. You should know and understand 4-str...

Low-cost import exhaust system for scooters with horizontal Minarelli engines. Originally for 10” wheel scooters, but with a few minor modificati...

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

Very good quality aftermarket crank for horizontal 50cc Minarelli AC and LC engines. The crank is a 100% match to the original and is an outstandin...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Float bowl gasket for Keihin PWK carburettor.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original. Unlike the NGK BR7HS or Bosch WR5AC spark plugs...

Solid aluminum machined height adjuster kit. This height adjuster kit is 47mm. The strut can be mounted using the four holes onto the shock absorbe...

Replacement speedometer drive gear for Yamaha Aerox, BWs as well as MBK Nitro, Booster scooters with 10mm wheel axles.

Aftermarket part for defective kick-start shafts. Item matches design and size of the original.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Malossi Sport 124 is a high torque cast iron cylinder kit with robust piston and 2x rings. Easy to tune, great for beginner tuners. The cylinder ki...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

Naraku small end bearing [HD-Quality] - 12x16x13. Suitable for Minarelli and CPI, Generic, Keeway, Chinese-built 2-stroke engines with 12mm gudgeon...

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Brake shoes with reinforced compound for excellent wet weather performance. Supplied with a set of new shoe springs. Size: 110x25mm Generally for r...