Yamaha

The Heidenau K61 Reinforced is a sports-oriented scooter tyre with very good handling and top direction changing. Great mileage and good wet weathe...

The Heidenau K61 Reinforced is a sports-oriented scooter tyre with very good handling and top direction changing. Great mileage and good wet weathe...

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

The Heidenau K62 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Thanks to the high-quality materials used in thi...

Thanks to its open block profile, the Heidenau K62 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Thanks to the ...

Shaft oil seal Internal diameter: 20mm, External diameter: 42mm, Thickness/Depth: 8/9mm

Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of th...

After crashing, forks and triple clamps can become warped or twisted and steering stops can be broken off. Steering bearing sets should always be r...

Complete set of quality crank oil seals from Naraku, for scooters with Chinese-built, Minarelli-based 2-stroke engine (engine code 1E40QMB). Set co...

Replacement front right indicator glass for Yamaha BWs Bump 50 (96-98), CW RS Spy 50 (95-98), BWs Next Generation 50 (97-98) as well as MBK Booster...

Replacement front left indicator glass for Yamaha BWs Bump 50 (96-98), CW RS Spy 50 (95-98), BWs Next Generation 50 (97-98) as well as MBK Booster ...

Replacement taillight glass for Yamaha BWs Bump 50 (97-98), CW RS Spy 50 (95-98), BWs Next Generation 50 (97-06) as well as MBK CW RS Booster Next ...

Replacement taillight for Yamaha BWs Original 50 (99-03), BWs 50 R (01), CW BWs Original 50 (02), CW BWs SP Original 50 (02), BWs Naked 50 (03), CW...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have h...

Naraku cylinder head studs for Piaggio cylinders. Great as a replacement for broken or damaged studs. Individual stud. The stud is 110mm long with ...

Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricate...

Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Cylinder head gasket for horizontal air-cooled Minarelli and 1E40QMB engines.

Replacement indicator glass front and rear for various Derbi, Rieju, Yamaha and MBK scooters and geared mopeds. The turn signal lens corresponds to...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Replacement taillight glass for various scooters and motorcycles from Cagiva, Italjet, Rieju, Voxan, MBK and Yamaha. The glass is consistent with t...

Replacement clutch bell for lightly-tuned engines. Matches the dimensions of the original (107mm). Cheapest clutch we offer, but definitely worth t...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Transparent coolant hose with 15mm internal diameter, 1m in length. 15mm coolant hoses are often used on scooters and mopeds with Minarelli engines...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Complete engine gasket set for horizontal Minarelli AC and LC engines. This gasket set contains all the relevant engine gaskets for air- and water-...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Cylinder gasket set for 50cc air-cooled Minarelli engines. Suitable for original and aftermarket 50cc cylinders.

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

Complete replacement indicators for Beta, Derbi, KTM and Rieju scooters and motorcycles. The turn signal corresponds to the original part. For fron...

Complete replacement indicators for Beta, Derbi, KTM and Rieju scooters and geared motorcycles. The turn signal corresponds to the original part. F...

Low-cost seal for membrane blocks on upright 50cc 2-stroke Minarelli engines. Please note: generally an upper and lower seal is required.

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...